Briggs and Stratton Engine 12H802-2677B1 Engine on a lawnmower starts and runs. However, after about 45 minutes of running full speed, depending upon the outside temperature, it will die and not start until it is full cooled off.
I have;
• de-carbon the head and top of the piston
• buffed the rust & corrosion off of the armature / magneto and the flywheel; gapped & reinstalled
But it ran the same.
I suspect a weak armature / magneto because the engine is 24 years old.
Am I heading in the right direction?
I have;
• de-carbon the head and top of the piston
• buffed the rust & corrosion off of the armature / magneto and the flywheel; gapped & reinstalled
But it ran the same.
I suspect a weak armature / magneto because the engine is 24 years old.
Am I heading in the right direction?