cjyoung3902
Forum Newbie
D130 lawn tractor will crank but not start. The engine will run momentarily by squirting starting fluid in the carburetor. Accessing the carburetor, I discovered a mouse nest and the white or gray wire to carburetor solenoid chewed in two. Fixed that issue then discovered the solenoid wire has only .40V when the key is turned to the on position and the solenoid will not click open. I understand it should be 12V. I validated the carburetor solenoid is good and works by applying external 12V to the solenoid. I am thinking maybe some other wire, maybe safety switch wire, has been chewed in two or is shorted out by insulation being chewed off. I would like some ideas of what to look for before starting this troubleshooting effort.