Export thread

Chris

#1

F

fayetteam

Hello everyone my name is Chris and I am in Ringgold Georgia. I purchased a 28"/9HP/RER/M SERIES 19 a few months ago and per this web sites advise
contacted Snapper this is their response.
Chris,
The numbers you have provided are the model number needed for your unit.
The engine on your unit is a 28B702-1154E1-990114ZE engine the engine was made in 1999.
Your mower is a M280919B and the serial is 94234883 and was made in 1999. the model number on the unit tells us your unit is a 28 inch cut 9HP series 19 with a Briggs and Stratton pull start engine on it.
We hope this information is helpful.
I was able to do this from advise on this website! Thank you very much!
Driving to Mt. Juliet Tennessee in the AM and I wanted to get something on here, I will leave some pics, and talk to y'all again on a later date.
Looks like some friendly, helpful, folk on here.

20130823_0096.jpg 20130823_0097.jpg 20130823_0098.jpg 20130823_0099.jpg


#2

lawn mower fanatic

lawn mower fanatic

I'm glad we could help! Do you know what thread you asked for help in?


#3

F

fayetteam

lawn mower fanatic said:
I'm glad we could help! Do you know what thread you asked for help in?
Click to expand...

I was trying to find out more about my Snapper, googled it, and it led me here.
I was not paying much attention to the threads just wanted to learn more about the Snapper.
I joined lawn mower forum here I am. I could be wrong, I've been wrong before.
Had I have known, I would have kept better track of what I was doing.
I can only hop this answer is to your liking.


#4

F

fayetteam

fayetteam said:
I was trying to find out more about my Snapper, googled it, and it led me here.
I was not paying much attention to the threads just wanted to learn more about the Snapper.
I joined lawn mower forum here I am. I could be wrong, I've been wrong before.
Had I have known, I would have kept better track of what I was doing.
I can only hop this answer is to your liking.
Click to expand...
I can see now I put this in thread Chris (oop's) I am not fluent to forums.


#5

Carscw

Carscw

fayetteam said:
Hello everyone my name is Chris and I am in Ringgold Georgia. I purchased a 28"/9HP/RER/M SERIES 19 a few months ago and per this web sites advise
contacted Snapper this is their response.
Chris,
The numbers you have provided are the model number needed for your unit.
The engine on your unit is a 28B702-1154E1-990114ZE engine the engine was made in 1999.
Your mower is a M280919B and the serial is 94234883 and was made in 1999. the model number on the unit tells us your unit is a 28 inch cut 9HP series 19 with a Briggs and Stratton pull start engine on it.
We hope this information is helpful.
I was able to do this from advise on this website! Thank you very much!
Driving to Mt. Juliet Tennessee in the AM and I wanted to get something on here, I will leave some pics, and talk to y'all again on a later date.
Looks like some friendly, helpful, folk on here.

<img src="http://www.lawnmowerforum.com/attachment.php?attachmentid=16680"/> <img src="http://www.lawnmowerforum.com/attachment.php?attachmentid=16683"/> <img src="http://www.lawnmowerforum.com/attachment.php?attachmentid=16684"/> <img src="http://www.lawnmowerforum.com/attachment.php?attachmentid=16685"/>
Click to expand...

Hope you enjoy your mower.

I am in ringgold today cutting yards.

If you ever need any help keeping your mower going just let me know and I will be happy to stop by.

(( cowboy up and get over it ))


#6

lawn mower fanatic

lawn mower fanatic

fayetteam said:
I was trying to find out more about my Snapper, googled it, and it led me here.
I was not paying much attention to the threads just wanted to learn more about the Snapper.
I joined lawn mower forum here I am. I could be wrong, I've been wrong before.
Had I have known, I would have kept better track of what I was doing.
I can only hop this answer is to your liking.
Click to expand...

fayetteam said:
I can see now I put this in thread Chris (oop's) I am not fluent to forums.
Click to expand...

You're fine....I thought you had asked for help awhile back on this forum, but you just Googled it. I now understand.


#7

F

fayetteam

Carscw said:
Hope you enjoy your mower.

I am in ringgold today cutting yards.

If you ever need any help keeping your mower going just let me know and I will be happy to stop by.

(( cowboy up and get over it ))
Click to expand...

Appreciate ya!

Actually the mower does good for now cept a few drawbacks.
Seat is the wrong seat-------------------- (bolt holes not wide enough, only held by 2)
I need to straighten out the wiring a little---(not clean enough)
Probably needs bearings and zerk fittings--- (repacked/replaced)
And whatever else I come across in routine maintenance.

I really love the KISS method employed by the manufacturer, simplicity at it's best.


#8

Carscw

Carscw

Yes they are very easy mowers to work on and just last forever

(( cowboy up and get over it ))


#9

F

fayetteam

Carscw said:
Yes they are very easy mowers to work on and just last forever

(( cowboy up and get over it ))
Click to expand...

I believe it!

We the unwilling, led by the unknowing.
Have done so much, with so little, for so long.
That we are now qualified to do anything, with nothing!


#10

djdicetn

djdicetn

fayetteam said:
Hello everyone my name is Chris and I am in Ringgold Georgia. I purchased a 28"/9HP/RER/M SERIES 19 a few months ago and per this web sites advise
contacted Snapper this is their response.
Chris,
The numbers you have provided are the model number needed for your unit.
The engine on your unit is a 28B702-1154E1-990114ZE engine the engine was made in 1999.
Your mower is a M280919B and the serial is 94234883 and was made in 1999. the model number on the unit tells us your unit is a 28 inch cut 9HP series 19 with a Briggs and Stratton pull start engine on it.
We hope this information is helpful.
I was able to do this from advise on this website! Thank you very much!
Driving to Mt. Juliet Tennessee in the AM and I wanted to get something on here, I will leave some pics, and talk to y'all again on a later date.
Looks like some friendly, helpful, folk on here.

View attachment 16680 View attachment 16683 View attachment 16684 View attachment 16685
Click to expand...

Chris,

What brought you to my neck of the woods(I live in Mt. Juliet)?? Welcome to the forums!!!!! That's a nice looking mower for a 1999 model!!


#11

F

fayetteam

Chris,

What brought you to my neck of the woods(I live in Mt. Juliet)?? Welcome to the forums!!!!! That's a nice looking mower for a 1999 model!![/QUOTE]

djdicetn,

Just now checking email.
My better halves (we have adopted the the Kurt Russell / Goldie Hawn method) sister lives off of Lebanon rd, we went for a weekend visit.
The people there seem content and I especially enjoyed all the area water, relaxing to say the least.

The more I cut with RER the more to my liking.
Oh did I say nice Gravely!

I hope this is a legit pic for this site if not I will stay with mowers​

The dog, Mt. Juliet Tn ​

20130825_0112.jpg​


#12

S

sgmgarden

Welcome to the forum Chris! I missed the day you arrived on the forum but better late than never to introduce myself :laughing:


#13

Briana

Briana

Welcome to LawnWorld!

I moved your thread to the Snapper forum. :smile:


Footer Links 1

Top