CEO starting a Briggs 3.5hp engine
- Thread starter slomo
- Start date
mechanic mark
Lawn Pro
- Joined
- Jul 15, 2013
- Threads
- 175
- Messages
- 7,482
CUTTERHEAD PULLEY & SHAFT COMPLETE – McLane made in USA since 1946
mclaneedgers.com
McLane made in USA since 1946 – Mclane Lawn and Garden Equipment
mclaneedgers.com
Last edited:
- Joined
- Sep 24, 2017
- Threads
- 266
- Messages
- 6,633
huh
Exactly what I thought. He has the comments turned off. Bet the trolls were spreading the gospel and he shut off the comments.
We all have to start some place. Every time Bertsmobile1 types, I feel like an infant next to him LOL. Thought I knew enough to get a small engine running. Bert is about 7 levels above that LOL.
slomo
Last edited:
Keep rolling the dice.Suggestion: If you have a tap & die set you can chase new threads with a die & install a self locking nut to fit. Harbor Freight has both sae & metric sets.
Harbor Freight Tools – Quality Tools at Discount Prices Since 1977
Harbor Freight buys their top quality tools from the same factories that supply our competitors. We cut out the middleman and pass the savings to you!www.harborfreight.com
Carbon Steel Metric Tap and Die Set, 40 Piece
Amazing deals on this 40Pc Carbon Steel Metric Tap And Die Set at Harbor Freight. Quality tools & low prices.
slomo
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 65
- Messages
- 24,995
Will you stop this please Slomo it is getting embarrassing .
Back when I first came here most of the replies were in the vein of turn bolt B 3 times to the left and put locktite on nut 5
While this is exactly what needed to be done it did not tell the poster why they were doing it which in the long run is of little help in the future or to the reader who needed to turn bolt 3 six 6 times and back off nut 5.
On top of that I have been messing around with motorcycles since I was 10 when we made minni bikes out of old lawnmower engines .
An engine is an engine is an engine and basically they are all the same.
Same story for carburettors .
Mower wiring is just a slight variation on a common theme they are all so much the same it is not funny.
And yes I would have just threaded the shaft with the next size smaller .
However it is probably a LH thread which makes things a bit more expensive and you could probably get a good working 2nd hand edger for less than the die .
And yes he is an idiot but it was not that long ago that mower adds showed a barely clothed woman pushing a mower while wearing open toed high heels & we thought nothing about it .
I actually have been on some of these locations & there were stepping stones hidden in the grass so she did not sink in or break the heels off
The girls had to walk along a concrete path while the depraved editors filmed their brests bouncing so the stones can be placed at the right distance to get maximum boob bounce and hip swing .
So trimming in the crocks is a bit of a non event.
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 65
- Messages
- 24,995
We are all here to learn
I learn stuff I did not know every day
The day I stop learning is the day they shovel dirt on my face
On the web we are just electrons exciting a screen.
Nothing should be taken as gospel truth unless verified by the reader.
Thus no signature line in my posts with credentials or business details.
I make just as many mistakes as the next twit
And for all any one knows I could be full of bull , and be a 12 year old girl with advanced computer skill who gets off by fooling people she is a 69 year old mower technician
Last edited:
oldlawnguy
Well-Known Member
- Joined
- Jul 6, 2019
- Threads
- 7
- Messages
- 117
If your a twit what does that make the rest of us? I was fine calling myself a stiff...
We are all grasshoppers next to you Caine and I ain't blowing any smoke your way. ?