Carburetor for walk behind front wheel drive Poulan Pro lawn mover.

[3monkeys]

Thanks... too bad it's a very good machine but I can't find part.

 

[StarTech]

The 16100-Z870510-0009 part number is available through Homelite or at least my distributor has 61 of them in stock. So any shop that buys through Dixie Sales / Gardner can get you one.
for around $50 plus sales tax and any other add fees that the dealer has. Shipping may be added if special ordered below our minimum free ship level.

Now of course this a USA distributor.

 

[ILENGINE]

The 16100-Z870510-0009 part number is available through Homelite or at least my distributor has 61 of them in stock. So any shop that buys through Dixie Sales / Gardner can get you one.
for around $50 plus sales tax and any other add fees that the dealer has. Shipping may be added if special ordered below our minimum free ship level.

Now of course this a USA distributor.

When I put that part number into Dixie/Gardner I am not seeing that part number. What pops up is the 16100-z431010-0009 which shows 61 in stock.

 

[StarTech]

Yes I know that but it should be the same carburetor. I believe that number is just a supersede. Awaiting price file to verify this so they could be wrong on the cross. Beside I need update my file anyways with all the price increases. I got a couple days to get all my price file modified and loaded plus I got to add a 2.5% surcharge with CC use.

Update>
Price file doesn't even have the 16100-Z870510-0009 in it. I wonder why Gardner is coming with the cross. Of course they may have hand crossed it on their system.

 

[ILENGINE]

Or it isn't a cross and is actually a different carb.

 

[StarTech]

Or it isn't a cross and is actually a different carb.

Very possible.

And by looking up the RATO RV175 (V added for vertical engine) I come up with a Husqvarna PN of 593058201 which supposedly includes everything in the following image but neither Gardner or RBI has it in stock.

Link to Searspartsdirect show all these items in stock as the kit.

https://www.searspartsdirect.com/product/3ccextlna7-0071-917/id-593058201

 

[3monkeys]

Thank you so much every one for the info. Since sear moved out of Canada a few year back, I've to ship it to my relative and pick it up in Jul.

 

[3monkeys]

Hi StarTech,
Can I get bigger picture of the E08 ? While every look good , I just to see all the control on the top of the carb if it match my.
Thanks,

 

[3monkeys]

If it's OK, I would like to ask another quick question (without open a new thread), can I add a fuel line shut off valve and a fuel line filter ? My doesn't have one and I'm not sure if adding them would restrict the flow / decrease the pressure to the carb ?

 

[StarTech]

Just got to the Sear link and use the zoom function to get a closer look. Select the third image and use the roll over zoom. Now it will be a little blurry but you should still make it out enough to see the carburetor setup. sorry nothing better on the net. I not too trusty of line drawings but is a blow up.



As for shut off and filter I would the Red Briggs pancake filter for the gravity fed system an no problem with the shut off valve.