Can't find spindle for 72"

PTmowerMech said:
Commercial customer is wanting to sell this. But make sure everything is good before doing it. This one spindle is getting a bit sloppy and wants it replaced.

I'm glad you said that. Because I've kept all of the spindles he's replaced thinking they might be rebuildable. Just never had the time to look into it.
Click to expand...
Do what you need for the business but the spindle may just need the preload on the bearings adjusted or $20 in parts to replace the bearings. Sell him a new one, rebuild the old one and resell it.
 
bertsmobile1 said:
As hammer said,
Built properly with tappered rollers
So provided the housing is not broken , and it is probably a steel fabrication you are just up for bearings or even just an adjustment.
This is the prime reason we keep on using the 2000 / 3000 series Cubs,
Tapers on the blades like they should be.
Click to expand...

The last one I did, I had to almost completely disassemble the spindle to get it off. Me and the front end man just removed the seals and the bearings just a few minutes ago. Looks easy enough. He's well schooled on bearings and races.
The big bottom nut on this spindle is as tight as it'll go. No more adjustment on this. It's solid against the bearings and spacer (between the bearings).
So I'm gonna get new bearings, races and seals for it.

The customer is going to be happy about all this because he's been buying new spindles from the local dealer for about $200. Then paying me to put them on.

One question. Is that big nut supposed to be extremely hard to get off. Seems the closer it gets to coming off, the tighter it gets?
 
Scrubcadet10 said:
www.scagparts.com

Scag Deck Drive Spindle Assembly 461697 | ScagParts.com

Genuine Scag Part Deck Drive Spindle Assembly 461697 for Scag Zero-Turn, Walk Behind, Stand-On, Three-Wheel, Compact Bagging and Riding Mowers - Shop Secure & Save! Fast, Flat-Rate Shipping & Excellent Service.
www.scagparts.com
According to the parts place it's a deck spindle...
Click to expand...

The one on this machine doesn't have all those groves. Is smooth with the key slot. Just like the ones on the 52" and 61".
 
PTmowerMech said:
The last one I did, I had to almost completely disassemble the spindle to get it off. Me and the front end man just removed the seals and the bearings just a few minutes ago. Looks easy enough. He's well schooled on bearings and races.
The big bottom nut on this spindle is as tight as it'll go. No more adjustment on this. It's solid against the bearings and spacer (between the bearings).
So I'm gonna get new bearings, races and seals for it.

The customer is going to be happy about all this because he's been buying new spindles from the local dealer for about $200. Then paying me to put them on.

One question. Is that big nut supposed to be extremely hard to get off. Seems the closer it gets to coming off, the tighter it gets?
Click to expand...
it's not left hand threads is it?
 
PTmowerMech said:
The one on this machine doesn't have all those groves. Is smooth with the key slot. Just like the ones on the 52" and 61".
Click to expand...
wonder if someone else replaced them with the wrong spindles before? i highly doubt it but, seems weird, Scag shows one thing, then the mower its self shows another.
 
Scrubcadet10 said:
wonder if someone else replaced them with the wrong spindles before? i highly doubt it but, seems weird, Scag shows one thing, then the mower its self shows another.
Click to expand...

The other two are the same as this one. But If the bolt pattern on the housing is the same as the 61, then it's possible. If so, then it seemed to work, because he said he hasn't replaced this one in a while.
 
You must log in or register to reply here.
Back
Top