Hello,
I've got a briggs engine on a push mower that has me stumped. It wasn't running. First thing I found is the coil was spaced way too far from the flywheel. Reset the gap and the mower cranked up and ran good. Put the air filter base and filter on and it sounds like its flooding. Brand new air filter and spark plug.
Checked the flywheel key, and it is 100% fine. No partial shear or anything like that. Ordered a cheap carb just to see if something was wrong with the carb, but the new carb does the same thing. Runs good until you put the air filter on and it starts spitting and sputtering (rich fuel mixture is what it sounds like)
Any ideas what might be going on?
I've got a briggs engine on a push mower that has me stumped. It wasn't running. First thing I found is the coil was spaced way too far from the flywheel. Reset the gap and the mower cranked up and ran good. Put the air filter base and filter on and it sounds like its flooding. Brand new air filter and spark plug.
Checked the flywheel key, and it is 100% fine. No partial shear or anything like that. Ordered a cheap carb just to see if something was wrong with the carb, but the new carb does the same thing. Runs good until you put the air filter on and it starts spitting and sputtering (rich fuel mixture is what it sounds like)
Any ideas what might be going on?