Anyone running the Carlilse AT101?

Yes, the old ones look like they needed replacing - nice looking new ones !
That picture of the new ones loes not show how much clearance you have to the fender.
 
BKBrown said:
Yes, the old ones look like they needed replacing - nice looking new ones !
That picture of the new ones loes not show how much clearance you have to the fender.
Click to expand...


There is about a 1/2 inch of clearance...although you can't see it from my picture, I can barely get my fingers between the tire tread and fender.
 
OK - I guess you did need to stay in that size.
Probably the reason for the tube in the one with the flat is that there was an issue before. Did you see the rims before the new tires were mounted ? I hope there wasn't rust around the bead or you may have a slow leak - I always either check them myself or ask the person mounting to check and use bead seal.
 
BKBrown said:
OK - I guess you did need to stay in that size.
Probably the reason for the tube in the one with the flat is that there was an issue before. Did you see the rims before the new tires were mounted ? I hope there wasn't rust around the bead or you may have a slow leak - I always either check them myself or ask the person mounting to check and use bead seal.
Click to expand...


Rims looked fine, although they had issues getting that one to take a seat...both seem fine this AM, will check tonight. I want to add something like slime to prevent the same thing from happening again.
 
If you do add slime and need to have them taken off the rim - it is nice to tell the person changing the tire so it doesn't go all over them.
 
You must log in or register to reply here.
Back
Top