A simple L shaped manual mower lift.

[berniebenz]

Want to buy or build one. Works as follows: The adjustable length short legs would be placed under the front or rear axles, when the long arm is pushed to the ground the short legs go vertical to a slightly over center position, thus raising that end of the tractor/ mower several inches. Not wishing to reinvent the wheel, anything like this on the market? Ideas?

 

[Parkmower]

Yes I think Northern tool catalog has one. It sells for around $150. At their website search Mower lift

 

[reynoldston]

I sounds like a motorcycle lift. It also seems like I seen one made of wood somewhere.

 

[SeniorCitizen]

Want to buy or build one. Works as follows: The adjustable length short legs would be placed under the front or rear axles, when the long arm is pushed to the ground the short legs go vertical to a slightly over center position, thus raising that end of the tractor/ mower several inches. Not wishing to reinvent the wheel, anything like this on the market? Ideas?

*****************************************************************
The most economical solution may be to build an adapter that slides on the front edge of the dolly (hand) truck that you may already own. I use mine just as it is on the rear by placing it under the rear hitch but a little weight near the handle end is necessary because of the lack of an over center position but that can easily be overcome in the construction design.

 

[Turf & tree]

Go to mojack.com sorry, but it has already been done. I own the pro. If a mower falls on me at least I can sue them!