Motor: Kohler 7000 series 725. The starter left bolt worked loose causing a jump miss to engage. Replaced starter bolts and ground on left bolt.
A month later ZTR occasionally shut down and restarted after a few minutes after getting off and checking wiggling connections. Now nothing after turning off.
Replaced switch, solenoid, and battery. Should have joined forum first...this was wasted time and money.
Forum has helped with the following: It has 4 safety switches that have continuity. Seat, brake, control arms. Can they still be bad?
Main electrical connections cleaned and reconnected. Starts with screwdriver on solenoid.
Found two fuses, a 10 amp by switch, 25 amp near solenoid, also have continuity. Can fuse circuits be bad.
I have Neuropathy... This means I drop bolts, washers, and nuts that can take an hour to find them and attach them.
Not having fun getting old.
Thanks for reading this,
Jim
A month later ZTR occasionally shut down and restarted after a few minutes after getting off and checking wiggling connections. Now nothing after turning off.
Replaced switch, solenoid, and battery. Should have joined forum first...this was wasted time and money.
Forum has helped with the following: It has 4 safety switches that have continuity. Seat, brake, control arms. Can they still be bad?
Main electrical connections cleaned and reconnected. Starts with screwdriver on solenoid.
Found two fuses, a 10 amp by switch, 25 amp near solenoid, also have continuity. Can fuse circuits be bad.
I have Neuropathy... This means I drop bolts, washers, and nuts that can take an hour to find them and attach them.
Not having fun getting old.
Thanks for reading this,
Jim