2013 Badboy elite

[mike coulter]

I am having an issue with the left brake not releasing. I’ve sprayed the cable. Sometimes it’ll release then some time it doesn’t.
another issue I’m having is the spring for the drive belt tensioner broke and I can’t find one. Need a part number. Even looked on bad boys website and can’t find it
Any help would be greatly appreciated

 

[mechanic mark]

SPRING FOR DRIVE BELT TENSIONER ON 2013 BAD BOY ELITE MOWER - Google Search

www.google.com

034-9035-00 - Bad Boy Mowers Deck Idler Spring or Bad Boy Parts number 034903500

Bad Boy Mowers Parts for sale at www.badboylawnmowerparts.com. Get your 034-9035-00 - Deck Idler Spring here! Find your BB Part using our colored parts diagrams or simply search online by the Bad Boy Part Number 034903500

www.badboylawnmowerparts.com

 

[mike coulter]

SPRING FOR DRIVE BELT TENSIONER ON 2013 BAD BOY ELITE MOWER - Google Search

www.google.com

Did that and nothing came up

 

[slomo]

Did that and nothing came up

Use that cell phone and call bad boy mowers. I bet they have a toll free number.

 

[Hammermechanicman]

Bad Boy Mower Parts Lookup - Free Shipping On Over $100

www.badboymowerparts.com

 

[StarTech]

The drive idler spring is PN 034-2009-00. It is locate on Actuator IPL page.

Bad Boy 034-2009-00 Spring - eBay

Also you may need a section 1/2-13 all thread with a hole drilled through one end and a couple 1/2-13 hex nuts. Bad Boy wants nearly $13 for this item. Lowes has a one foot for around $3.

 

[mike coulter]

The drive idler spring is PN 034-2009-00. It is locate on Actuator IPL page.

Bad Boy 034-2009-00 Spring - eBay

Also you may need a section 1/2-13 all thread with a hole drilled through one end and a couple 1/2-13 hex nuts. Bad Boy wants nearly $13 for this item. Lowes has a one foot for around $3.

View attachment 65521

Appreciate the feedback Startech
I just ordered the spring
You know anything about the brakes?
It’s not the brake cable because it engages fine. It’s just that when the brakes are released, sometimes the left will stick

 

[StarTech]

Does that brake plate have its pull off spring? Item #22 It goes between items #10 and #20.

Also the cross over brake bracket #10 could be bent a little.

 

[mike coulter]

Appreciate the information
I’ll have to look and see when I get back home
I’m not seeing item #22 though I see the 10 & 20

 

[mike coulter]

Does that brake plate have its pull off spring? Item #22 It goes between items #10 and #20.

Also the cross over brake bracket #10 could be bent a little.
View attachment 65529

I don’t see any springs. Tried to upload a picture but even after reducing it it says it’s to large