kohler

Given normal maintenance, what should the average life expetancy of the 25 hp Kohler 747cc engine manufactured between 2013-2016 be in hours? I'm looking to buy a used one and I'm looking at models with between 900 and 2400 hours and don't know how to factor in hours. Also, I am looking at some...

my dad has a kohler model ch25 spec68543 it is running rough has white smoke coming out of the breather tube. the coils checked good new plugs did a compression test 150 psi on one other one 120 psi any help would be greatly apricated...

Morning gents, I have a Toro Timecutter with a Kohler 7000 Series (34" Toro Timecutter 75734 - Kohler KT725-3097 to be exact). I already keep some belts, spark plugs, etc on hand in case I need them. Even if its just cheap Scamazon parts (just to keep things running in an emergency) what other...

Greetings, I have a Gravely Professional 8 hp with an odd Kohler motor, apparently. The engine tag lists it as a K181, but Ive had better luck with M8 parts manual. Starting with the cylinder head, got the machine with helical coil for spark plug and it eventually popped out 10 years later...

Purchased a Toro Bronco new 15 years (or more) ago and it has had a very babied life at a lakehouse that only gets used about 3 times a year. I had a need to loan it to son-in-law that burned up ( it literally caught on fire ) his new JD Zero turn. Never had any issues at all with the Toro /...

Does anyone know how to access the fuel idle adjustment screw? The carb has three covered access ports on the top rear throat which on some other similar carbs have a lean/rich adjustment screw. I can drill and remove the factory plug but I am not sure which of the three in a row plugs covers...

So long story short I bought a 2003 Craftsman DGT6000 with a 27 HP Kohler Pro. Replaced both head gaskets and rebuilt the carb. Been In the shed for a week and today I went to blow the leaves into a pile and It didn't like it. It will run completely fine just driving around or even sitting still...

Have an issue with no spark on my 22 hp 7000 KT725-3012. When cranking the spark plugs are not firing. When key released will see a quick flash on the plug tester indicating power to plugs. Whatever is inhibiting the spark during the crank process is released for a second when key is released...

Does anyone have and can post the Kohler training bulletin showing costs and locations? Thank you

My 2002 16hp Kohler 2166 Cub Cadet with only 200 hrs. on it is now stalling after starting ,running and mowing fine for maybe 5-10 mins. then it sputters and quits running. After it cools off and sets for a while, it fires right up runs and mows great then sputters and quits again. Plenty of...

I currently have the displeasure of working on a Toro 522xi with a Kohler CH22 engine. While doing service on it I noticed it has a very small headgasket leak starting on the right side cylinder head. (The one with the oil fill port). It's a little hard to say but does this engine need to be...

i changed my oil and when i went to take the oil filter off it seemed like there was a little gas in the filter..the mower runs good with no smoke..i have a possible stuck float needle or could it possibly be the fuel pump..im trying to get the money to get it looked at but cant right now..just...

What do you think?

Kohler engines and Kohler Power Systems has been rebranded with the name Rehlko pronounced REL-co.

Bought an CC XT3 GSX in 20018. 6 Years later she's using oil. About 1qt/hour (mowing session, we are on 3 acres). I checked in the Spring and a replacement Kohler was just shy of $ 3K. But I like Kawas better, so is there a drop-in replacement? Anybody tried? {PS: NOT impressed with MTD/CC. Best...

Hi All! I long-term loaned my Wacker VPG160 Vibraplate compactor to a relative. One day, the Kohler engine would not start when he was on a project. As a "favor" he swapped the engine for I think a Predator or some other Made In China engine. (Whatever he could get quickly) The Kohler used to...

I have a Hustler 927806 with a Kohler CV740 engine. I bought this mower used and have been restoring it and now that I have it running, there is a problem with it running rough under load. It runs fine with full throttle and no load, but if I put some load on it such as blades engaged and going...

I have a Hustler 927806 with a Kohler CV740 engine. I bought this mower used and have been restoring it and now that I have it running, there is a problem with it running rough under load. It runs fine with full throttle and no load, but if I put some load on it such as blades engaged and going...

Can anyone tell me whether this control module has been superseded to the 24 584 58-S? I have a Dixie Chopper XW2600..I foolishly jumped started the mower to get the workday completed (thought the battery had depleted)...The mower now has no power light/power at the switch. I can hotwire the...

Hi, Does anyone know where to get the male mating connector to plug into the wire harness on a Kohler CV23 engine? Part numbers and manufacturer wouldn be greatly appreciated Thanks, Carey

motor turns over, getting fuel but no spark

A friend has a Kohler SV600S motor that starts and dies after about 5 seconds. He has cleaned out fuel tank, changed gas lines, fuel pump, coil, spark plug wire, spark plug and carburetor with no good results. Anyone have any ideas I’d really appreciate it.

Hello All, I picked up an abandon Troy-Bilt Horse riding lawn mower with a Kohler Courage sv720 v-twin 23 hp engine. In an effort to get it running I did a cylinder leak down test, adjusted the valves, replaced one ignition module, changed the oil and oil filter, fresh air cleaner, fresh fuel...

Guy, got quite a problem brewing here with the daughter-in-laws' JD Z520A. Dealer 'worked' on it last year to the tune of ~$1100. Long story short, somehow oil leaked out of engine & she blew up. Dealer steps up & puts in a new engine. Only problem is, the holes to mount the engine don't align...

So here It goes, I bought a Craftsman DGT6000 (1998) with the 27 HP Kohler Command Pro V-Twin a month ago knowing It had some Issues. It started and drove when I went to look at It and the engine sounded good so I bought It. Got It home and started messing with It and found It burned oil bad...

I have a Kohler engine KT725-3031 that I can't get to run. I've replaced the fuel pump and carburetor and it will only run with carburetor cleaner for just a second. Fuel is getting to the carburetor, at least to fuel filter. It has a thermostat assembly 32 755 27-s that attaches to the side...

I have a Kohler command pro CV730S. It is burping back the carb (puffs of gas vapor coming out the carb) at idle. Seems like a valve problem but it is supposed to be hydraulic valve lifters. No adjustment. loses power under load in heavy grass and uphill. But not every time. I did a governor...

Greetings and thanks As the mower warms up...it will get to a place where the left handle will need to be pushed forward past the right handle making them out of balance and eventually it begins to make a whining noise and just does not really want to work. If I go very slow I don't really...

my spartan RT Pro with kohler kt745 will not crank with both kill wires attached. I can disconnect either one and it cranks and runs but only firing on cylinder with kill wire disconnected. I can disconnect both and it turms over but does not crank. As soon as I plug the other kill wire it dies...

Need a new muffler on my Wheelhorse Toro 520xi with a Kohler Ch20. Have parts diagrams for everything except muffler and heat shield. Where do I find the correct muffler for this engine? Also where best to buy?

I bought a Craftsman T7400 with a Kohler KT735 (140 hours) V-Twin. Runs great no problems and only 140 hours. I also have a Craftsman YT4500 with a Kohler SV735(350 hours) that’s got Terrible rod knock. The engines look identical down to the valve covers but with a different engine shroud. My...

New to forum. Have a 72" Hustler X-One with the Kohler Engine. Is there an economical way to get a diagnostic tool to see what is ailing it? Developed ratty running, changed all filters, plugs etc. Still doing it, gets worse as motor heats up

What I have here is a Kohler Sv735 V-twin and at low idle it has a very loud knocking sound to it, very audible from behind the engine. Full throttle and it goes away a little bit but you can still hear it, just not as clearly. (I have had one of these engines before and for those asking "why...

We have a Gravely ZT 52 zero turn mower we got for cheap. The previous owner "hit something" with it and it died. He then dragged it to the garage. Hydro uniits are free but the motor is definitely locked up. Are these motors relatively easy and economical to rebuild or is it better to just buy...

Hi all, I have a Cub Cadet rider with the above engine. I removed the rocker arms to address another issue. Now the engine will start but as soon as the lifters pressurize, I lose compression (holding the intake valve open). After the engine sits it'll start but same issue. Rocker stud adjusted...

Ok so I screwed up. My PTO clutch wasn't getting 12v to close and get the deck on so I said screw it, found 12v and a ground, ran it through a switch and it turns out the ground I used was the wire going to both coil packs. Long story short, I fried both coil packs, so I replaced them (and...

I'm looking for a muffler for my ZTH6127 mower.

The engine I was working on is a Kohler Command CV22S. It is a 2001 and running great. I had just changed the oil and was test running the engine. During the checking of the oil level I noticed that it was a little foamy. That should have set off an alert. I continued noting that the oil...

this is the second time i have had to replace this flywheel ! the first time was in 2015 and the magnets were destroyed a lone with the stator. kohler said they were having trouble with there glue. this time the magnets just came off and were stuck to the stator . i believe it has a 25 amp...

Kohler SV540S will turn but not run,changed everything new, head gasket, lapped the valves and gapped, carburetor,air filter,fuel filter,still not run. Shows 65 psi compression. Could it be timing problem.Have not opened engine itself. What else should I check.It was warm then suddenly stops at...

I have a 2006 Cub Cadet LT1050 with a Kohler Courage 23 with 350hrs. Two weeks ago i performed my annual maintenance. I changed the air filter, fuel filter, installed new correctly gapped plugs, change the oil and oil filter and sharpened the blades. After performing this work i cut my lawn and...

I am working on a 1987 Ex mark 32 inch walk behind commercial mower. It is a model number 32-12.5kd5. The Koehler engine number is illegible. I can read a Spec of 7275. 390 cc and a serial number 2611504544. Anyway it is a pull start and starter would not pull. I took the starter off and...

So I have no need to adjust these until I started get the hard to crank issue. Knowing this is likely the valve adjustment, I got in there and there is no lock/jam nut. How do you adjust these and then not have it back itself off?

I have a John Deere L130 that I used last week. Went to start it today and it will not crank. As I am trying to track electrical problems, I found a paired ground wire set that runs to a connector that isn't connected to anything. It comes out near the starter/solenoid, but there doesn't seem to...

My old Kubota with the 15 hp Kohler became almost impossible to start. For a year we struggled with getting it to fire strong enough to overcome the compression release. Once running it was powerful and ran normally. Then, getting it ready for this summer's mowing I could not get it to start...

No spark on cyl 1. Have power to coil and continuity from pin 22 on the ECU connector to coil connection/trigger wire. ECU is bad? And it's discontinued. Spark was intermittent before it finally died.

i have a hustler raptor with a kohler 7000 series engine..in my air filter housing i can smell gas..the filter looks like gas has got on it too..im trying to determine if this is a carb problem which i am thinking it is or something else..the mower runs fine and does not smoke..any help will be...

Hello all, I'm working on an old (2009) Bad Boy Pro 27 with a Kohler 27 hp. I did a longblock swap using a used longblock and the original accessories including charging system etc. Mower preformed perfectly for several hours then began blowing the main fuse. I traced the issue back to the...

Cub XT1 LT46 Mfg 08/22/2018 Model KT725-3078 After running for a short time (5-10 minutes) engine bogs down and dies. Doesn't matter if it is under load or not. I have found I can get it to re-start by spraying some carb cleaner followed by starting fluid directly into the carb but it dies...

I've had this mower since new. Great machine. Only problem was the "Smart" choke. Plastic broke off of it. I put choke cable. Works great. I have a problem now that when I turn the key sometimes it just turns the flywheel 1/4 or 1/2 turn and stops and sometimes it starts. So far it's started...