Search results

So I did a tune up on my l111 which included a new fuel pump. Now I can't get it to pump the fuel. I have tried both pumps, tried running it from a bottle, with and without the fuel filter which was also new, and also a new vacuum hose. I do feel pressure from the vacuum hose yet I can't get...

So I changed out the battery and I have lost all power. The previous battery was not turning the mower over and I know this battery is good. But now I have no power at all. I even tried to jump both the solenoid and the starter and it doesn't even get a lil spark. I tried jumper cables to test...

So went to my local goodwill that has a separate store done by weight. So as I was leaving a employee was wheeling out a Ryobi 2000 psi electric pressure washer. They told me it had a leak which I figured the pump. So the sticker said 50 but after talking a lil she said I could take it for 15...

So here is the issue. The engine is strong but after it is going forward awhile it starts to move slowly this was donated to me by my church as they couldn't figure it out so I'm hoping to get it fixed. Any thoughts on to wear to begin at are appreciated. I also know it has a Kohler engine.

So my church is giving me a scott riding mower. I dont have the model of it yet as someone is going to bring it to me. But wanted to get a headstart on its issue. So it seems that while its running it becomes bogged down. But was told if you put it in reverse and than in forward again it will...

So recently I picked up a pressure washer someone was tossing out. Well I like a good project and so I grabbed it and first thing I did was replace the carb and spark plug. So she cranks and will stay idle but not go into higher rpms. I haven't had a chance to see about adjusting the carb yet...

Anyone have recommendations on a trimmer holster? Don't want to spend a ton of money but something that will take the strain off of my back while I trim.

So went to mow the lawn and midway the tensioner pulley was off. Does anyone know the size of the nut? Dont want to go to ace and buy a bunch of nuts if i can avoid it. Also wondering how it came loose. Not sure if it is supposed to be a locking nut or just a standard nut.

So a friend gave me his l111 because it wouldn't start and he went and bought a new one. So I replaced the solenoid and it is running good. But unfortunately after mowing the grass the belt ended up breaking. So after looking on Amazon the belts they have listed have all been the same complaints...

So a friend just gave me a John Deere l111 because he bought a new mower. It doesn't crank over but has power. The battery is good on it so to test the starter I used a jump wire from the battery to the starter. I got nothing on it. So I'm curious with this mower if that does work. I don't want...

Model 405000x8 So one of the spindles decided to go bye bye. Well I figured I would just replace them both. Everything was working great for 2 minutes when I heard what I thought was a bad bearing. So I parked it and loosened the belt and when I checked the blade was loose. So if I tighten and...

So since it's still raining everyday and my mower is back to normal I'm toying with this weed trimmer. So this is where I'm at. I changed the carb for a new one. I have compression and spark yet it still isn't turning over. Im not in desperate need as I'm thinking of getting a battery powered...

So since it's still raining everyday and my mower is back to normal I'm toying with this weed trimmer. So this is where I'm at. I changed the carb for a new one. I have compression and spark yet it still isn't turning over. Im not in desperate need as I'm thinking of getting a battery powered...

So I ran the engine yesterday and all went well. I installed a push button start and a new battery. Drove it to make sure it all ran fine. Later in the day I tried to crank it and it wouldn't move. I tried to spin in by hand and nothing. I can get it to move a quarter turn but it is like it is...

Hey guys, so first time posting here. So I have some engine knowledge mostly cars though. But my riding mower had stopped running. It would spin bit not fully crank. So I adjusted the valves changed the magneto and spark plug since it was not sparking and behold it started. But it was running...