Search results

"Biden Sends Electric Chainsaws To People (in the mountains) Without Power" Cat electric chainsaws. I'm sure they will work for 1 hour before they can throw them away. Also, I'm sure being the weekend one time logger saw is great for cutting wood 15hrs a day(if they had power).

Whoever has a Deere database, can u tell me how much trans fluid the G100 tractor K66C(at least that's what I found online) transmission holds? I find conflicting numbers online - 1 quart 2 quart, 1 drain bolt, 2. I drained mine and it takes 1 quart and upon shaking the tractor, I see the fluid...

I am trying to fill my (small) wagon wheels with foam. 3 tires are fine. 1 is giving me trouble. I have used 3 cans of foam (where 1.5 fills the other wheels) but the tire is still soft. The only hardened foam is some that oozed out the holes. Some "goo" comes out as I spray more in the tire...

I have wagons with 10" innertube wheels. They keep loosing air after only 6 months. I tried different stores- harbor, northern toll, tractor supply, and flat tire sealer with little luck. I have checked and found nothing to puncture the innertube with no luck. As many wheels as I have solid...

Parent company had a marketing conference at the resort I was at for the weekend. These are demos for people to try out. Up until this, I didn't know hustler has the same parent company as cub cadet.

I just came across a Poulan 361. I rebuilt the carb and it purred like a cat, but I had to remove it and upon redoing the mix screws, I can't get it to run right again. Can someone tell me what the default mix settings are? I know last time I had a goofy setting 1.75H 3L. It is like the game...

I just came across a Poulan 361. I rebuilt the carb and it purred like a cat, but I had to remove it and upon redoing the mix screws, I can't get it to run right again. Can someone tell me what the default mix settings are? I know last time I had a goofy setting 1.75H 3L. TIA.

I just got back. Last time I went, some guy was smoking out the gutter. This time: I never saw a push mower but plenty of people with these backpack trimmers: Lastly, might I suggest to business owners something to increase business. I mean if u sell keys, it works for this store owner so...

I have a Briggs and Stratton 11P902-0693-B1 where the 3 screws that hold the cover and pull cord assembly keep snapping. I tried wiggling it back and forth with no luck. Anybody have any trick with these screws? Briggs Engine

Anyone have a link to a diagram of the dimensions of where the bolt holes are for a Briggs 281707? I'm playing and would like to know where to drill holes vs eyeballing it. TIA.

I came accross a HS56 but it is missing the pull cord assembly. Before I buy the missing parts, I want to test if it runs so I am using a drill to crank to see if the ignition works. Compression feels good but that is for later. I do not get any spark(or is it I just can't see it???) with the...

Crew pouring gas to start another job:

If you have seen some of his experiments you know what I am talking about. I just found a mower with a Briggs Quantum engine. It ran bad. Taking a wiff of the tank, I noticed the owner used paint thinner as gas. Dumped it and added gas and it runs fine.

Does anyone have some history of Parmi Tool Co? Who bought them? I have come across some machines from that company lately. Thx.

Every spring, I spray weedkiller. Every spring, many of the weeds curl up but stay green. Some of them, 1 branch is curled up, the other branch looks untouched. They look like they are laughing at me with a black eye instead of being dead like they are supposed to. I read the instructions temp...

Husq K760 Can anyone tell me where to get the circled part? I guess it is right hand thread and trying all screw sizes, nothing fits. As shown, they don't have a part number for it. Anyone have this saw laying around for parts? Thx.

Cali finally dropped the hammer. So does this stop people from ordering gas powered equip from outside cali???

I have a quantum mower motor where 2 bolts that held it to the mower deck broke off in the engine sump. I never had to extract this so for anyone who did - is it a pain to remove(I assume heat it up wiht a torch and whack the bolt) so is it worth the trouble?? TIA.

I have a problem\question on the trigger. It starts but when i squeeze the trigger nothing happens. I opened it and see a slot but nothing to catch the "ball" at the end of the cable. Can someone post a diagram so I can see what is supposed to be pulling the cable when i squeeze the trigger?? TIA.

I just got a 70's briggs engine(8hp updraft fyi) where the threads on the steel gas tank are messed up. Any ideas on how to fix the threads? I was thinking if there is a pair of pliers with jaws to reform the threads...Does one exist??

Does anyone have a Husqvarna k760 saw or similar that is hosed that I could buy some parts off of?? specifically https://www.ereplacementparts.com/husqvarna-k760-power-cutter-parts-c-114486_118655_198127.html parts 8-10+ the bolt. Please PM me. Thx.

Just stopped running with no spark. Tried swap sparkplug. Troubleshooting, I checked the points gap, and resistance open infinite and 0 when closed- being i disconnected the ground and from the ignition coil. I tried swapping the condenser(with a new one) - i want to test that R goes up but i...

Not sure why it was at the curb being i just opened the gas valve, choked it, and it started. Not a spec of rust on the chrome. Obviously very well kept. Honda mower

Here are some pics of machines in Japan\Taiwan in addition to the "Battlestar Galactica" blower i posted before. A "see how the other side lives" if u will. Asia equipment

I have a "chopsaw" "cut-off saw" K770 where the compression is too low - 60psi. Spark OK, spray starter straight into dry cyl no go. Looking from carb side, the piston looks perfectly fine if not better than some pistons that work. My first assumption is it needs a new cylinder\piston but as...

I just got a few blowers (for $10 each :LOL:). Just changing the primers did the trick and they all run. Looking around, I see all stickers that would tell me what model i got are gone. I think it looks like models BR500 to 700. Can anyone tell me what else would tell me what i got?? Thx.

I have a Sabre(JD) but the problem is more a Tuff Torq problem. The mower has the k51a trans. It moves kinda slow so i figured to change the fluid. The fill plug is just under the battery so to avoid removing the trans each time to change the fluid, I cut a hole to reach the fill. From watching...

Im stumped. I first tried a new spark plug.Then i tried a SS to replace the points. I then tried a new ignition coil. Then i tried a different flywheel(magnet seems fine- both original and replacement wheel). All of this still no spark(plug or spark tool). I sanded surfaces so the coil and SS...

I have a Wisconsin motor from a snapper mower i got last summer. The motor was missing carb pipes and carb itself. Being the part is NLA, I got around to look into brazing aluminum being i never welded before. BWAHHHHHHHHH!!!! She's alive! Honestly i thought the joint would just break off. Now...

I'm looking for some labels- the ones on the front "4HP" and "TOUGH" decals to finish off my paint job. I don't see any of these on the internet so i am going to inquire with a local printer. If i find it much cheaper to order some quantity of them, is anyone out there interested in joining me?

While my Q isn't a "Snapper" Q, snapper did sell a bunch with them so maybe someone can help. My Snapper has the W1-185 engine. The "problem" i have is that even with the choke applied, i cant get it to start. Spray a little fluid in the air filter and it runs like a champ. I soaked the carb so...

The great debate- $40 for the non self propelled with the slanted lettering(older model) or more recent "commercial" with self propell for $20....

Upon replacing the piston rings, i messed up the very thin shimmy that is on the crankshaft resting on the oil pan. Looking up parts diagram,they don't show this part. Is it sold with the crankshaft or evil thought- can i live without it?? TIA

I have a echo shc-225 where the cutter shattered. It broke inside the gearbox. the broken part then broke the gearbox. Being home use, it is still "under warranty" about 4 years old. I use quotes because the dealer told me odds are echo will give some lame excuse and not cover it. calling echo...

I have one laying around from a neighbor's hosed motor. it is .75OD with .17" square drive. Let me know.

I have a TV... (motor with plastic carb). it wont stay running. prime and it starts. I took off the carb and cleaned everything out so that is is spotless. This is the second one that i came across that acted this way. The first one I tried rebuilding with same results so i dont want to buy and...