Search results

selling my tractor ran good till mower belt broke has been stored in garage for last two years, i'm thinking carb and gas tank need cleaning,has new front tires.and drive belt. I also have a craftsman LT1000 with 42 inch deck needs carb work, both must go. 250.00. ps the ST16 also comes with...

does anyone have a part number for a good replacement carb

I have this old tractor with 16hp motor and 48"deck ,has hi and lo and 3 speed trans , can someone tell me the rite gear to be in to mow with it

I have a craftsman gt5000 model 917-276101. tractor seemed to lose power going up hill,so I replaced drive belt, with one from sears that I had in package for about ten years, its a light brown belt its 1/2 by 82 1/2 it seems better but not right .whats the best belt to use ,and how much tension...

my trimmer has new carb, fuel lines,and vent and I still have the same problem , starts great and runs strong for about 30 mins, then engine starts to lose power and shake, if I turn it off for a hour or so and restart its fine for another 30 or some mins ps I also changed gas cap, im...

I have a new battery in tractor and checked the voltage at full wide open, and reads 12volts, I checked the alternator wires ac volts read 29acv,believe that to be good, but I cannot find the reg, can someone tell me wear it is , and what the voltage should be, I don't think this means anything...

My Honda has the white lever auto return choke "16610-z2d-802" the lever goes from choke to open way to fast is their anything I can do to slow it down.

I have a shindiawa trimmer with a blue case and no model or serial number, trimmer has a straight shaft and lever lock, I can only make out a 7 in the model number, my question is what years did they make them with the blue case, or can someone tell me models that used the blue case, Thanks::frown:

I have a 10.5 b&s motor with electric start, with engine running and I walk over to mower with my meter in hand to check charging system,with meter on volts it starts bouncing like crazy , ive disconnected the alt wires and still bouncing ,driving me crazy, next I took a pair of upper cables...

my mower starts great and runs fine at idle and mid way but at full wide open its surging, don't want to drill out jet .

Ihave a self propelled md 8073 im looking for the drive control lever from the wheel to the control rod, and the parts that hold the two together thanks

I HAVE A HUSQVARNA 44 CHAIN SAW WITH A SERIAL # 6141412, WITH A BLACK TOP COVER, WANTING TO KNOW YEAR IT WAS BUILT TO BUY PARTS, CAN SOMEONE HELP.THANKS

I HAVE THIS GRAVELY ZERO TURN, I BELIEVE ITS A 1995, HAS A KOHLER CV20, 20 HP V TWIN MOTOR, WOULD ONLY RUN ON FULL CHOKE, CLEANED CARB,AND IT RAN GREAT FOR 5 HOURS,THEN STALLED AND AGAIN WILL ONLY RAN ON CKOKE, THIS TIME I REMOVERED THE GAS TANK AND FLUSHED IT OUT, IT REALLY WASNT BAD, I THEN...

I have this motor on my mower is there a tool to remove the seat from the carb its a walbro or can you tell me how its removed that's. jim

I have a nice running driving 13 hp Honda 2013 its automatic, the trouble is when mowing and I step on the brake the shifter will not return to neutral unless I move it . also can you tell me what this tractor is worth its in really good shape ,ive moved and im going to need a bigger tractor...

I have a craftsman lt1000 tractor model number 917-272680, with 17hp b s motor it cranks hard then starts and smokes blue for about 5mins clears up runs good , why the hard cranking and smoke .battery and starter are great shape thanks

Hi guys I have a old locke mower ,and im looking for a repair manual, its a 8hp , model 200451-0175. thank you

Im looking for a replacement carb,I love this old trimmer but it needs a carb, not a kit, please help

I have a older ferris walkbehind mower, with a fc420v motor, no battery,i have no voltage to electric pto,but have 34 ac volts coming from stator,no dc volts to pto,

I have a 2013 Honda tractor with hyd trans cant get fliud from Honda .what can I use in its place

I picked up this tractor with the trans removed, was removed for oil seal replacement, guy lost interest so I got it really cheap, my question is does anyone have a picture of where the arm with a spring attacked from the trans pulley go.. its a H2013HDA. also where can I pickup a trans selector...

I HAVE A WLA-1 carb on my 500t blower , my question is can someone tell me what the (piston assy is, number 12318539130) and what it does, im thinking its some kind of power valve, its brass has a oring, and spring

I checked the compression and only has 50 psi, removed muffler no scratches, no leaking seals im thinking rings

I found a company that sells the small D with a long handle ,and comes with a large D tool with a short handle , not cheap 49.00 dollars but I think its well worth it .

blower is two years old , fuel lines and filter have been replaced , carb cleaned, has good blue spark ,will not run , even with a shot of starter fluid, im thinking maybe low compression, any thoughts

trying to find a small d carb adjusting tool ,can someone help me out or know of away I can adjust this carb its a WLA-1. THANKS

my eb7001 blower ran great still today , found that it has a cracked piston below lower piston ring , what would cause this , blower serviced each season, 50/1 fuel mix. thanks, jim::frown:

my fc540v kaw mower is using oil, fouling plug, and smokes blue on and off mustly on , can you tell me how to check it for bad rings or headgasket, and what compression should be thanks ,was going to keep changing plugs but want to fix it

I have a ferris mower with a fc540v motor ,calls for a r n11yc spark plug ,but I keep fouling it after running it for 4 or 6 weeks , its burning oil but for right now I have to keep running it ,can I go to a hotter spark and if so how hot should I go. thanks

I have a 6 hp briggs & Stratton on my power washer ,it starts up fine and runs really good but for only 10 mins, I checked gas cap , carb air filter and plug

I have a ferris mower with a 17 hp Kawasaki motor, its charging 13 volts at idle and with it wide up 12 volts with or without blades on , it seems backwards to me, id think it would put out more wide open then at idle

I have a 1280 howard price mower with bate wings ,61hp diesel motor, the front deck runs all the time , replaced switch and soloid, wiring all looks fine

my 20 hp craftman with kohler motor will shut right off every time I try to ingage the blades ,they spin free by hand

is there adjustment I can make to get more rpm out of this mower

I just removed the blade and blade clutch .to replace drive belt ,the blade clutch disc fell and im not sure if it madders witch way I put the disc