Search results

Thank you, going to get on it and hopefully it's not bad

It turns on but revs to high

Open the engine up and replaced governor?

I solved the mystery on this issue finally .it was blade engagement switch that was acting up and replaced it.Now it's good, tried it out and no issues.But l have another one that was using and it reviving up high all of a sudden.could be the governor inside gone bad.thank you for helping me on...

Thank you, I'll give it a try and get back with you.l bought a new solenoid just in case and put it on.battery is new and next changing switch for piece of mind 🙏

Thank you,Have a safe and happy holiday

Thank you, l'm just lost with this mower ,l put a new solenoid just for piece of mind.But now my mower clicks and no action on starter.l guess with my loss and this going on is getting to me.

One l that have to connect to battery pos or neg,

Now it won't crank over

Should l be probing the switches for test,l connected to post and touched the side of engine and it lights up same with magneto wire coming to grounding in side of engine.

I don't have a clue sorry

I disconnected the kill wire to magneto and tested it and light came on the test lamp.what puzzles me is that l replaced solenoid just in case and hear click and nothing on starter.should l be connecting to negative on battery for testing.

I replaced the solenoid,is there a part inside the starter l can replace.

I did a little probing,l replaced the solenoid just in case and l was probing the wire from magneto and disconnected from ground on side of engine and it lighted up along with the wires that connected from ignition switch,safety switch module,and Magento.Are those suppose to be lighted.still...

Thank you very much

Yes,

Sorry for not getting back with you all,l had a sister pass away and my mind wasn't on the Snapper 😢

I got a test lamp,if l probe the ground wire connections should it light up to suspect a faulty ground.one end to post on battery and probe the ground connections.

Thank you,🤞

I can repair a lawnmower and 2 cycle, but the electrical part on riding mowers and safety switches are kinda mind blowing to me. I'm new to this,and your right with the YouTube videos.

I tested the ignition switch and it tested good,and as for the solenoid l jumped it and All it did was click,no action on starter

Thank you for everything on your expertise, I will certainly try that

Thank you

Thank you, I'll try it out and get back

Thank you,l Will and also l'm putting in a new solenoid just in case.ls it true to say that the solenoid is in charge of cranking starter.

Was cranking before,now l get nothing.checked for current at solenoid 12.79 .shadetree#1 . I'm puzzled on this.l have 12.69 at solenoid.

Engine was cranking over with the spark plug out but no spark

I'm thinking it's a grounding short.what would keep the engine from cranking (solenoid).l energized the solenoid and checked the post for continuity and it toned out checking contact from post to post while energized.

I did a little testing today,checked the ignition switch and the solenoid and it tested good and still no cranking.The starter doesn't turn over .Is there a way to test the starter to make sure it's good.

It starts

Briggs and Stratton 21A907-0124-E1 Engine and mower is Briggs and Stratton 21A907-0124-E1 Engine and my mower is snapper 281223BVE

Also starter has 12.89 volts at the stud

Yes, jumped started the starter and cranks to start,At first l didn't have spark at plug, my thoughts are that it could be the switch not letting spark to starter and is grounding out.l test check the solenoid and it engages or clicks .also l think you or probably right on safety switch not...

Yes,it turn the engine over to start.

I bought a new battery that is pushing out 12.89 at the solenoid.l think the switch or solenoid is not passing current to starter because l didn't have spark . would it be safe to say to get new switch and solenoid?

Hello shadetree#1 I was to jump start the starter and does turn engine over to start.

My son bought me this awhile back while being deployed and got hurt, so this mower means a lot to me, just hurts me that l can't figure it out .Thank for your advice

I'll attached the positive to starter stud and negative to ground in body?

What am looking for this riding mower stuff l'm learning as l go .For light not to come on or not.sorry

Also checked some safety switches, but l need one that's under the rear of mower and so far good.

Also checked the wire at the magneto connection no cuts.

Hello Star Tech and Thank you for everything, did a little finessing on the Snapper 281223BVE.now the mower doesn't crank, check the ignition switch and the solenoid and this what l have going on.I have 12.89 voltage at solenoid connection and also at the starter connection.could the switch and...

Did a little trouble shooting as much as I could,no crank or spark.checked voltage at starter and it has 12.89 and at solenoid connection the same Voltage, any suggestions on this please.Snapper mower 281223BVE also checked ignition switch

I'm a newbie on riding mowers, should I check ignition switch and safety switches,it starts fine when disconnect wire on magneto

Thank you,I started by the magneto to check for spark,The ground wire attaches to a central location on side of engine and from there to solenoid.

Could it be a ignition switch or safety switch.