Search results

If mulching blades only worked that way. Leaves would have to be recut dozens of times to shrink a pile. Some electric blowers grind up leaves.

Let's recall who's watch we are under, right now. Trump is not in office yet people. All these percentages and prices have zero to do with the next guy in office. If you like wartime gas prices, something is wrong. I dislike them. I recall gas was $1.69 for E-10 and $1.99 for E-0 in Oklahoma...

There's your dinner. Most people don't get rid of good running mowers. Like cars and trucks, they dump the broken down used up stuff. Hope the seller mentioned it had a lot of wear on it.

Watch the whole video. Watch at 7:38 for the fuel squirt. This shows the primer working.

OEM Briggs carb or Amazon? Primer sounds like it is not working. Look into the throat of the carb with the choke plate open. Push primer. Should see a small stream of fuel squirting up into the carb. Parts need to function not "look" like they do something. Most of the time the air filter...

Why is there zero visible oil in these pictures? Wow...... Did you clean it out with solvent? Look at that cam. Agree most of it is damaged. Look for another cheap rider and rob the engine off it. Facetrash market is one place to start.

What the heck. Must be page one of all the back door tricks LOL. Wow. Where did you get this upandup? Looks like something I need to load into my PFSense box.

Wine and Wine Tricks I think it's called. Probably a few more programs that allow you to run Windoze programs on a Linux box. I've never tried AutoCad on Linux. Probably a Linux version of AutoCad out there??? Always the dual boot way as well. Windoze and Linux.

You would think if he bagged it up it was a runner at one time. Bag held moisture and rusted the rings up is my guess. ???? Citric acid is a Mercedes Benz approved trick on radiators. It is very gentle. Rust converters, naval jelly, acetone and ATF or a heat gun. Several ways to do this. I...

Put your fingers on the wire. Follow it to the other end. Post a picture like you did here so we can see what you are working with.

Is there a specific engine this covers or EVERY Kawi out there? Never seen this before. If specific to some model, maybe that engine doesn't have an after-fire solenoid?? Kawi doesn't mention anything about cooling. They are concerned about run-on after the key is off.

No oil in a Briggs, she will be fine if you can get her to spin over. Little polish on the crank and such. Good to go.

She how she runs with a straight raw fuel line off the tank. Or auxiliary fuel tank.

Can you post a screen grab of this please.

Have to disagree. Linux Lite is the closest "looking" desktop and functioning clone to a Windoze machine IMO. Windoze 11 is another animal. I'm talking about Win 7 and 10 looking. 11 you have to hit 4 more buttons to get where you want compared to 7 and 10. Oh and it's sooo much...

Not any out there. We all hear this a lot. No good mower techs anymore. Need to put mower repair on cell phones, facetrash or Nintendos so people will learn about them.

Fill the oil back up and clean the cooling fins.

When you don't have the tool, make one. Grind the deep socket wall down till it fits. Easy right?

Pictures pictures please. Post them up here.

Just waiting on someone to offer up the fix that never fixes anything. Going to heavier oil LOL LOL LOL LOL . What color smoke is it blowing? Like this?

I like the shots fired call when mine winds down.

Like most items they install the smallest wire that doesn't catch fire and the device somehow works. Just learned that spray juice you glob on battery terminals is just a fine viscous grease in a can. I like those felt doughnuts. Slobber in grease then put terminals on. Keeps the acid away.

I leave fuel in all my gear. Had to put new fuel lines and such nearly ever year in something. They dry out internally and externally stored in the garage over winter. Cracks and such set in. Started using Stabil year round. Never a fuel slash hose problem again. Starts on 1-3 pulls in early...

Carb needle and seat hanging open. Time to rebuild or clean the carb. What color smoke? Pull the plugs. Bet they are black. Clean and regap. Carb issue yes, fuel pump no. Would just crank and crank and crank and crank without any fuel.

You guys need to try Linux Lite. If you can run Windoze, an easy stretch running Linux. No need to find unobtanium drivers and many other easy things if does on it's own. No need to load or find a printer driver........ No viruses and Linux people don't poo-poo where they eat.

So true so true. On every air cooled engine out there. More often if bagging or scalping. Some riding baggers can dump grass up high and get sucked into the shroud. And when you empty said bags it pours out all over the engine.

Does this have a carb solenoid on it?

ok has some miles on her. Typically a main jet is clogged or a dead cylinder if you have two. Make sure you have a solid flow of gas AT the carb inlet. From 2006, that carb is probably plugged up. So are these carbs OEM Kawasaki parts? Or Chinese Scamazon/Fleabay? What do the plugs look...

Moral of this story is CLEAN YOUR COOLING FINS. Swear this has been posted on here buy one of us. (y):D

Air, fuel, spark and compression. Good places to start. Find out which you are lacking. SLOWLY hit the primer. Does it fill up the bulb with fuel? Don't smash it like you are trying to draw blood. It will bring more air into the carb. Primer bulb should draw mixed fuel from the tank sending it...

11 is terrible. Added more buttons to get to where you were trying to get to in windoze 10. 11 has more back door, three letter entitie spying capability added of course.

Makes it $11,000+ out the door. You can buy several years of lawn crew service where they mow it for you. You don't have to cut any grass, sweat all over yourself in the summer, maintain that monster machine and store it. Fuel and so on........ You sit on the couch drinking a cold one watching...

For??? Oh I get it. It got sucked inside the engine. Case closed LOL.

Some local schools slash vo-techs will do the labor for free. You buy the parts. Worth a free phone call I bet.

If all else fails, take it to a machine shop or local vo-tech welding/metal shop. A bushing should be easy to swap with correct tools.

Yup yup.....

Don't forget all the massive rutting going on with those 2,000+ pound behemoths. Turf compaction every time you mow. Going over it again and again and again and again and again trying to get the clippings small enough to pass for a nice looking lawn. If you have hard pan clay soil like I do, a...

They self prime. Mine works great. I feel lazy as to not having to crawl under the car and dump oil all over the garage floor LOL. Kinda like cheating on an oil service.

How are you to burn, water?

Normally in OKC, we have a summer drought. Could be your grass is drying out letting the mower sink to the dirt resulting in a lower cut. Raise the deck if you want a taller cut. I know what I said about drying out sounds weird. I have some Zoysia that FLOATS my entire mower with me on it. You...

Either your scanner tool is not updating as in you are looking at live data or something. Pulling the wire off the temp sensor should tell the computer the block is say -40F or something crazy out of the norm. This should be no different than a car engine. The temp sensor is like the...

What does the spray pattern look like? Tells me the injector/s are dirty and or low fuel pressure. Should be a misting cone like pattern. A tiny squirt like a male child urinating is not good. Take a 9v or 12v battery. Energize the injectors. Spray carb cleaner backwards if possible. Then...

Which one are you going to use? GG makes more than one product.

What does the spray pattern look like?

Dirty injector? Okay got to ask? Is this water or air cooled? If no radiator, have you cleaned the cooling fins? Spark strong all the time or do you lose spark?

I'm not a mower EFI xpert. I would stop buying new parts and TEST what you already have. All those new parts are suspect till you confirm they actually work. From what you wrote, I would guess you still have some trash in the fuel system. Was the fuel can an old style with maybe an open top...

Got one off Scamazon for 25 bucks. Has 12v battery leads on it for power. Nice long tube to extract used oil.

Plastic seat back to a steel seat pan? What material to what?

Use it to clean parts. Don't throw it away guys. Or spray it on your wooden stockade fence. 100 plus year old farmers trick to preserve the wood.

Keep what you have. New doesn't mean new these days like it used to. Older machines are built better.