Search results

You are pretty much right with what you say here, however dropping the transmissions and the tensioner do make it a lot easier that I found.

I thought it would be a walk in the park, but the park had lots of holes, hills and was not a pleasant job to to say the least. Good luck with yours, and don't expect to be done in an hour!

Thanks Mark, with your help, I've found what I was looking for. Thanks again.

Replacing transmission drive belt on MZ Bad Boy 0 turn, anyone had the honor? (sarcastic)

You are probably right. Think it best for me to go on and order the wiring with the diodes i it.

Kohler don't give an example of the wiring detail in their website. The one I posted is the best I have found.

It's a ch 22 spec 76516 Kohler

Let me post post a link to the website : https://pandpsmallengines.com/ it's in the manual section for a 3206 cub cadet year 2000. I hope this uploaded for you. Thanks for you help.

I have a shorted out fuel solenoid wire that has 2 diodes in the wire, the wire splits into two separate wires that connects with the main wire harness. The diodes shorted out at the clip at the back of the engine. What are these diodes for? Could I wire them straight as they are burned up...

Probably asked and answered before, is their a substitute for the "cub cadet drive system fluid plus" that goes into a 3206 differential? 17.00 - 18.00 dollars a quart is a lot for oil. Thanks, goat roper

Engine surging even after putting on new carburetor, doing the same as with the old. Is there a simple fix? Thanks goatroper

I believe this may be a "fun kart" briggs engine. Is it rated more hp than the regular 5 hp. engines? Seems it takes a different gas tank from the regular 5hp engines. Anyone run into this before? I don't have the cowl for the recoil, so any numbers are missing.Thanks

Thought I had posted earlier, however, the second 22 hp JD briggs stratton engine has throwed craps in a matter of 4 years on a Z425. Is there an engine that will interchange besides the B/S that anyone has tried, like a kohler, kawasaki or anything besides a B/S? Thanks for any input, goat roper

I have a water cooled kawasaki engine I'm parting out with: good radiator $35.00, pratically new water pump $35.00, no fuel pump. Any needs I will ship through post office at whatever actual cost is. I'm in Brighton, Tn. 38011 Thanks for looking, Gary M

Hello all, I have a broken cable on the transmission for this self propelled mower. My question, what is the best way to go about removing the assembly from the mower to replace this cable. Or is it necessary to remove the transmission? Thanks for any help here, Goat Roper

I had this mower of friend with the kawasaki engine on it, the recoil spring had broken. I checked every where for a replacement and all I could find was $41 - $42 for the complete housing, not wanting to pay that much, I decided to try and come up with a fix. I cut an old weed eater recoil...

Would someone here, help me determine where the spring item # 18 "fits" into and into what on my starter for this 7265. I must be overlooking something here. I see it faces towards the flywheel, is that what aligns it to the teeth? Thanks for any help here. GM

I have a cub cadet self propelled mower model# 12a-977a100, not sure how old it is. It has the Kawasaki engine with the plastic pull rope. The spring broke for the rewind, no replacement for the spring only available, you have to buy the whole top part that will bolt to the top of the engine -...

Hello to all fellow enthusiasts. I live in south west tn, and have a few old mowers that I work on and some I have kept. I have several old sears suburbans, and one parts suburban, with the old tecumseh engines, a wheel horse and a ford both with the kohler engines, 10 hp. and old cadet 76, with...