Search results

When I was at the JD store in northern Michigan, we had a lot of Stihl equipment come in for various smoking/non starting/ not running right complaints. We'd ask the owner what fuel they were using. Most bragged about using rec gas from the local co-op. The assumption was this was ethanol free...

I worked in the service department of a JD dealer for a couple of years, primarily in the lawn and garden area. We sold the same tractors as the big box stores, plus the bigger real John Deeres. Everything on the E and 100 series was cheaply made, but cost as much to service or replace as on...

I take mine to the local Walmart. They take it at no charge. Some will take filters too. I've also found some auto parts stores will take it, sometimes they charge.

Sounds like fun. Might check into local laws, so you know what you're up against. Might just have to add some lights. Add to the learning experience!

I had to Google this to find out what it is, I'm assuming it's shown in the attached photo. I don't really know the value, but suspect it isn't very high unless you find somebody who thinks these are really cool, or has one he needs spare parts for. The lack of response to your question...

It's parachute cord, but a shoelace should work just as well. I actually don't tie it on, just run it through, wrap both ends around my hand, and pull. It's a modification of how parachutes are closed. I 've thought about making a tool out of a piece of stiff wire with a hook on one end, and a...

This may help. It's the 52" deck from my Conquest. Note that there are 2 belts, and the pulleys for each are in a single plane. One goes to all 3 spindles and the lower idler, the other goes to the PTO on the engine, the left spindle, and the upper idler. The white shoelace on the idler arm is...

I didn't see this suggestion (next page) until after I tried to follow Rivets' suggestion. When I took the connector off the switch to check continuity, I accidentally took the switch apart. I put it back together, tried to check continuity again, but realized the reason I wasn't getting...

My new motor came today, and I need to go to town and get some metric bolts to fit it. In the meantime, I connected the wires to it and tried it out. It works the same as the old one! it works when I push the switch in the "up" direction, but not "down". I checked again with a VOM, and I get...

I just ordered a Flip motor, from the manufacturer (a few bucks less than Amazon). It will be interesting to see how it holds up. I found mostly positive reviews when I googled them, but there aren't a lot of reviews. I wonder if my rough yard is hard on the motor(s).

Checked with a volt meter this morning and it's +12 one way, -12 the other. I took the linkage apart to work it manually, tried the motor without it pushing or pulling anything, it still only works one direction, so I guess it's the motor. Still unsure which one to go with.

Thanks. I'll check that. So far I've just used a test light.

I've got a 2021 Conquest (2691676-00). The cutting height motor seems to have gone bad (I've only got about 50 hours on it, probably half mowing). The last time I put the deck on, it would only raise the cut height, not lower it. I've got juice to the motor both directions, so I believe the...

I would also check your manual for how to engage and disengage the PTO. It probably says to do so at full engine RPM. When I worked at the local JD store, we found that belts flop around a lot more if engaged and disengaged at idle than at full engine speed. We started asking customers how they...

Back to the Broadmoor: The most unique feature of Simplicity tractors, in my opinion, is that instead of carrying the deck, they pull it. This lets the rollers adjust the cut height close to the blades, rather than relying on the tractor tires and all the variables between them and the deck...

One of the techs at the John Deere Dealer I used to work for swore by using graphite spray to make the underside of the deck slicker, prevent/reduce build up. He encouraged its use as an annual thing, after cleaning the underside of the deck. Other techs pooh pooed it. Might be something to try.

Just a few thoughts, have someone watch you (or video you) backing down an incline, and see what is happening. If it's the shocks, I would expect the observer/video to see them move. Another area to look at is the mower deck (you don't mention if you are mowing or not when it happens). I've...

If you go to www.simplicitymfg.com, under "Support" choose "Manuals" and type in your model (part number). The first choice in the results is electrical information manual for 2002. It has wiring diagrams for all the models that year, yours starts on page 55 (on the diagram, not the finder)...

That's most likely a fuel shutoff. When you shut off the ignition, that shuts off the fuel. Kills the engine, also prevents fuel flow to the bowl, which if the float sticks, will flood the engine.

I don't really have the answer to your question, but since no one else has chimed in, I'll give you my 2 cents worth. We probably need to update that expression. My guess is that the two are about equal on reliability but have no real data to back that up. Neither is sold in the big box...

I'll double check that when I put it all back together, but I think things are correct. I have the actuator out of it right now, and it's not moving at all. I've taken the cylinder part of it apart (spoiler alert, it's a hydraulic unit, not a nice clean screw driven one. today I refilled it...

I bought a 2021 Conquest with only 10 hours on it. Everything is great except that the deck lift is stuck in the full up position. Since I bought it used, B&S/Simplicity won't won't honor the warranty. The local dealer suggested it might have rusted up in storage, suggested I get it out on...

Several of the newer models have or offer a suspension system. Have any of you used one of these? How well does it work? Is it worth the added cost? Any issues with lost traction or anything?

I've seen some green mowers with the battery hooked up backwards that either fried the whole harness or some critical component! I think you were very lucky!

Within a couple years, I'm going to have a much larger yard, and would like to get a Simplicity Lawn/Garden tractor to mow and care for it. I've talked to a couple dealers about new tractors, one is hesitant to sell Broadmoors because of transaxle issues on lawns with many hills (mine is pretty...