Search results

Model 80303 or 80302? It stamped on the side of the starter cover. Not sure where you found that other information.

Hello S., Stihl is pretty restrictive when it comes to their repair information. They require people actually attend online or in-person paid training. I honestly do not recommend attempting to perform major engine repairs on these engines. These engines require specialty tools and considerable...

An aftermarket carburetor should be available for this engine without too much trouble. The tube with the screen should not have a hole in it. That screen is the actual fuel filter. These were simple, reliable carburetors, but had a habit of wearing the throttle shaft and housing as they aged...

This is not a totally bad idea, but I see this only being functional in a straight-line operation with no obstacles and not practical using it going straight at a garage door recess area or close trimming around trees. The rounded end cutting ball spindle is much more effective and versatile...

Maybe this will help: https://www.bing.com/videos/riverview/relatedvideo?q=Cleaning+a+B%26S+plastic+carburetor&&mid=89E24F947ED6C7FC15FE89E24F947ED6C7FC15FE&churl=https%3a%2f%2fwww.youtube.com%2fchannel%2fUCA9GlAGvSMsoXBPR77JTTJQ&FORM=VRDGAR

What climate will this machine be used the most? Is it for regular mowing, snow plowing duty or both? Find the label on your transmission to determine what series/model number you have. Go to the Tuff Torq website for their recommendation. Most are recommended to use Tuff Tech 5W-50...

Hello K., Your picture was hard to distinguish because the gear was still installed and you were too close to the area. Now that the gear is off the damage should be easier to see and understand. I have a feeling this is going to be a pattern failure for this engine design. Can you also share...

Most "old timers" like me go by the standard of .010 coil air gap, .020 points gap (back when they used points) and .030 spark plug gap for push mower and rider engines. There are manuals available online for your particular engine. The engine has its own set of ID numbers. Cub Cadet does not...

Hello P., Glad you got it running. One of the forgotten rules on those early pulse-jet carburetors is they were moody about starting if the fuel is below 1/2 tank. The B&S push mowers carbs with the single tube were the worst for this problem. When I first started out in a small engine shop...

Is that gear plastic/nylon? Can you take a picture of the broken gear you removed? I have this same engine on a walk behind trimmer and might consider changing this out this gear before it breaks

You are dealing with 6 hilly acres? Sounds like it is time to consider a compact tractor with a wide finish mower deck.

Is the gas cap blocked off somehow? Blocked vents on the gas cap can cause this problem. It's been years since I have had an old one like this do this, but it can happen.

I am a fan of Stihl handheld blowers. The biggest thing with any 2-stroke is to empty the fuel and run it out of fuel if it is going to be stored for more than a couple of weeks.

I suggest you pull the muffler of and heat it up red hot with a torch and burn out the years of carbon buildup. Your compression is a bit low. If exhaust cannot get out, air/fuel will not get in properly. It helps to confirm you spark with an adjustable gap spark tester. If no spark, the first...

Hello M., Locate a key on power wire for the positive side of the electric pump to splice into and also install an inline fuse. A 20A fuse should suffice. The fuse is to isolate and protect the rest of the harness in case the pump ever fails. The ground can go to the chassis as long as the...

Use a torch and get the muffler red hot to cook out the burnt carbon deposits. As for the scoring, it looks minor and was likely from excess carbon that has collected on top of the piston. This problem happens quite often with people who mix their own oil/fuel concoctions. Most people think of...

A section out of a cheap spiral notebook cover works well. People are always trying to make science projects out of simple procedures. Maybe if they spent some time learning about ignition coils magnetic induction their life would be less chaotic.

In the famous words of Ron Poppel "Just set it and forget it". Of course, many people in the past have become so brainwashed by our throw it away society it was practically expected. Now, the prices have skyrocketed on new equipment and actual repairs, and servicing are coming back into view...

Trade up or live with it.

Hello J., Welcome to the forum. Just for future reference, please provide us with the product ID label information and the engine label information so people can help you more accurately. It is rare that problems like this can be resolved so rapidly without details.

Try blowing shop air back through the fuel supply line to see if it clears up the problem. I have had lots of blocked fuel tank pickup tubes and fuel lines choke with grass chaff and garbage from dirty fuel cans.

And your point is Chinese ignition modules are full of surprises and the bonus word "new" that makes people think it is anything but the new parts. The exhaust likely had a rodent nest from sitting. It is rare to have a muffler defect but not impossible.

Hello M., Sounds great. Make sure to clean the points with a small strip of whit notebook paper to remove any trace of oil or sediments. This is a vital step with new and old points that will prevent pitting. I always liked the adjustable tappets in these engines. With most other...

The left side is not producing power according to the temp reading. Check for spark output on that coil using and adjustable air gap spark tester. The cheap light bulb type spark testers are not reliable.

What is the "spring" you installed on the linkage? Can you provide a couple of pictures? Did you possibly attach to the choke linkage and not it is being held wide open. Don't crank for extended time because it will damage the starter eventually.

I recommend you look up your engine label information on the Parts Tree website. A have had too many issues with Amazon parts. eBay is also a good source, but look for genuine parts

A conventional rider has its limitations also, so be careful when close to steep banks. They will tend to crab walk on soft ground when going across at an angle.

Whenever you ask about a machine, you need to include the chassis ID label information. If it involves the engine, it will have its own label that we would need the information off of. Is it a running leak or just seepage with dust gathered around it? The main thing is to keep them topped off...

For the build quality, I would go with the Husqvarna, but shop around and see if any of the area tractor dealers can give you a better deal along with service capability. Tractor Supply is just a box store vendor, and their prices have been higher than most around. Tractor supply has no service...

The one shown in the picture is badly bent. It would help to have the product ID label information from under the seat. https://www.partstree.com/search/?tab=models&search=yta24v48+husqvarna+48+yard+tractor+parts

Hi O., The way I read it, he wants to replace the fan.

Welcome V., Whenever you ask about a problem on a machine you need to provide us with the chassis product and engine label information. We have no idea how your machine is configured and there are thousands of possibilities out there. Most problems like this start with a weak/bad battery and...

Hello M., The tricky thing to always watch with 2-stroke engines and a compression test is the muffler "coking" up with unburnt fuel/oil. I have revived quite a few weed eaters that other shops condemned by removing the muffler and heating it up red hot to burn out the carbon waste. As a basic...

Hello C., Snapper has made thousands of models over the years, and it is difficult for my crystal ball to envision what you have. A model number and a couple of pictures would help?

There are older cheap ones that have a rubber tip, and you would hold it by hand in the spark plug hole while cranking the engine. They would do in a pinch but were not very accurate. Another type has the thread in adapters and a rubber flex hose; they work pretty well. They are also the most...

At this age, that is sound advice to replace all of the hydraulic hoses.

When I was a service manager at a local JD dealer, the small engine and rider customers consumed much of my time with "stupid". JD and aftermarket warranty were both difficult to get approvals through and of course the customer feedback survey was a tool the customers abused often. Many of...

Hello K., Welcome newbie. It always helps us understand what machine you have by providing the chassis label and engine label information. Not all machines are built the same. This also help reduce endless run on postings with a bunch of people guessing. My observation of your problem from a...

I like to compare wiring schematics to a roadmap. Not all of the "roads" are on a map, just the ones that the design artist thought were important at the time. Old "country road shortcuts" are often not on a drawn map. Along with that, I have not met an engineer (yet) that took the most direct...

Darn! I've been checking and everything has come up sold so far. I will give these a try. Red metal one ordered, and I hope it will fit. I will update once it comes in.

I learned early in my career as a mechanic to never underestimate a ground or the ground connection. They cannot be trusted by looks alone.

Hello sgkent, It is a 26086 (series 6) that someone put a 30" deck on. From what I have found so far part#7037334 should be the correct part.

I got my crystal ball back from the shop today. It showed me a Toro rider when I was looking for Husqvarna rider. LOL Have you checked the old grease you took out? That stuff is sticky and will hide small parts easily.

I will suggest that the ground not being present, the control circuit looked for a new path. I've seen this happen many times working on automotive systems especially windshield wiper motors.

Hello MParr, Many of these has a rocker arm actuated fuel pump or a pump on the side of the block down low. I have not seen any modern Kohler/Rehlko horizontal engines that are gravity feed, but I see new things all the time. This machine apparently has an electric fuel pump mounted on the...

Hello T., We are not here to beat up on people, but everyone needs understand that without the machine and engine label information we are just going in circles and guessing. Personally, I hate to guess. Parts Tree shows and entire tank, but no separate pump and sender unit...

In this situation I recommend you pull the carburetor off and remove the fuel bowl, then the float. Inspect the tip of the needle for damage. There is also a chance that some debris got into the fuel inlet and got stuck in the seat. Make sure the float is not full of fuel, if it is, it needs to...

Here is a parts source that may help you. Most likely suspect is the contactor that powers the actuator. https://www.partstree.com/models/2691676-00-simplicity-conquest-52-garden-tractor-25hp/electric-lift-group-6/

Provide the product label information off of the chassis and the engine information label. Otherwise, we are guessing. In this day and age, no two mowers are built the same for any reliable amount of time. I don't recall these coming with an electric fuel pump. Was that a hardware store...

Does this model have a throttle control cable and lever, or is it designed to run at one fixed high speed? What is the product label information on the chassis of the mower and the information off of the engine label? Without the actual label information, we are just guessing.