sgkent's latest activity

https://www.ebay.com/itm/178443263545?_skw=7037334&itmmeta=01M15D5FD7WC0DNDBDR0KMS483&hash=item298c0c1e39:g:1M0AAeSww99qj2E8&itmprp=enc%3...

just relying on the image looks like that is the detent mechanism that holds the shift fork in different positions/gears/whatever that...

anytime something dies immediately after fuel is added, the problem is usually fuel. Kerosene can empty? Water in the fuel?

Exmark 126-3949 is on fuel tank assembly page. $180 - $225 depending where purchased from. Better make sure a mouse did not chew a...

ask yourself why the pushrod broke. Was the governor messed with when the pushrod was replaced.

might want to leave it off for a few seconds after it dies, and measure the coil kill wire to ground to see if it is the coil kill wire...

there is a huge difference between a well maintained piece of equipment that needs repair, and something that has been allowed to...

might get an inexpensive oscilloscope and throw it into the circuit to see if they system is producing AC. Charging voltage can be right...

especially on a mower that probably should be at the end of its life and sent to salvage to part out.

send us a link to the carb you bought, or post photos. Lots of times on these replacements you need to figure out where the existing...

If you meant engine not turning when you tried to crank it, you need to check battery voltage with the ignition in the run position and...

Tell the client that you really want his business, and to help him so he doesn't feel snubbed, and change the quote to an hourly rate...

I looked online out of curiosity after reading this thread from the beginning when it began. The parts diagram shows conventional hoses...

If I had the answer to your question I would have shared it. Did the best I could. Yes, people who help others on forums like this have...

might want to price out a new mower. But, that said, I just rebuilt a toro mower that cost me near as much as a new mower. The irony is...