sgkent's latest activity

not a clue but maybe this might help https://www.mcmaster.com/products/o-rings/

sounds like you are close. There are tach programs for a smart phone.

one cylinder or two? If both died, I would try spraying a little berrymans b12 into carb to see what that does. If the engine spins...

compare the length of the old belt to new one. If your mower has a brake shoe that hits a pulley to stop the blades when you disengage...

just remember - three things to run - fuel/air, spark/timing, and compression. One is missing. If it isn't bad fuel, can you tell us...

are you saying that if you apply 12V to the trigger terminal on the starter solenoid it will turn over and the engine will start...

I agree with you. Stupid shows up so many places.

Well podcasts is something I don't listen to so you could have seen something I never experience in my shop. But there was one here that...

I would suggest checking all the other frame and mounting bolts to be sure they are properly snug. Sometimes when something like this...

saw one on a podcast recently. It appeared that the whole engine had gotten really hot at some time from dirt and clippings that built up.

Google AI: Top Smartphone Tachometer Apps SoundTach: Best for vehicles and small engines like motorcycles, dirt bikes, lawn mowers...

if it is a plastic manifold, you may have a warp between it and the carb, allowing just enough air in that the idle mixture is affected...

Very possible - in which case the pieces got between the head and piston. That has the same effect including a damaged rod. The point...

there is a 3 month old post on facebook for someone named Josh Duke who was looking for one. Might read that thread, it lists 3 dealers...

drain oil and gas, Replace. Dry off with leaf blower. Place in sun all day. Use motorcycle cable lubricator for best cable lube. Add...