Recent content by leeton31

Any one got an infra red thermometer and a zg222 or zg227 they can take some warmed up operating temperatures of the engine running, i.e exhaust, crankcase, valve covers etc. Thanks

G'day Slomo, yep I checked the coolings fins as I stated, all good. Thanks for your input.

G'day from Aus. G'day, Just introducing myself, Tony from Victoria, Australia. Own a Kubota ZG222 zero turn. Would have to be one of the toughest mowers I have had, but recently broke a con-rod, my fault lack of oil. Anyhow just getting it going again, thanks for the forum.

I pulled the motor out again checked all cooling fins, all good, decided to check woodruff key on flywheel, it appears it may have moved out of slot when I put flywheel on last time, I am guessing it fell into flywheel and stuck to bottom of magnet, that is the theory. I marked the flywheel...

Not sure if I can use a timing light on that.

Thanks, I did torque the flywheel, I may have to pull motor out again and check flywheel.

Hi, I have just partly re-built my ZG222 engine after a broken con-rod, I have re-assembled everything, checked and adjust valve gaps, engine would not start, however I then found sheared off woodruff key on flywheel, which I have replaced. Engine starts and runs but gets hot, I need to replace...