Recent content by LaWn GuY

So long story short I bought a 2003 Craftsman DGT6000 with a 27 HP Kohler Pro. Replaced both head gaskets and rebuilt the carb. Been In the shed for a week and today I went to blow the leaves into a pile and It didn't like it. It will run completely fine just driving around or even sitting still...

Been looking for a bagger for months. I have both a 2003 DGT6000 & a 2004 DYT4000. The accessories sticker under the hood of the DYT4000 list bagger 24979 (2 chute) & 24989 (3 chute). The DGT6000 lists only a 3 chute bagger as 24987. But I cant find any new. I've looked on ebay & marketplace but...

Yeah I found the correct car in Amazon and it will be at my house the next day for about $35 bucks. But I was trying to save the oem carb. I'm just tired of messing with it and it still doesn't run right. So I'll just order a new aftermarket one and see what it does.

Tractor is 917.275284 Engine Is cv740-0018 I reused all the parts. I finnaly cut with it today and It didn't like my back yard as It was constantly losing power and surging like it wanted to die. When I got to the front yard it did really good with zero problems. I did clean and flush the tank...

So here It goes, I bought a Craftsman DGT6000 (1998) with the 27 HP Kohler Command Pro V-Twin a month ago knowing It had some Issues. It started and drove when I went to look at It and the engine sounded good so I bought It. Got It home and started messing with It and found It burned oil bad...

My little Weed Eater tractor Is going on It's third engine. Factory engine was a 13 hp Tecumseh OHV. Had too many problems and was cheaper to have the shop put another used engine In. So they put In a 12 hp B&S flat head. Well this engine Is throwing heavy metal In It's oil and has always ran...

Ok first off this 12 HP flathead engine replaced my 13 HP Tecumseh, which Im currently looking for another. But anyway I don't know the history of this engine, the shop Installed It last year. It never ran quite right even when the guy drove It off the trailer and Into my driveway. Problem 1...

It's been cold here lately In the single digit's. Started It up today and It cranked slow but did start.Had the headlights on while cranking. While cranking It pulled the gauge down to 8. After idling for a few minutes I revved It and the gauge went to 16 Volts. Is this normal? I replaced the...

I received my Volt Gauge Amazon.com : New Universal 2" 52mm Tint Lens LED Volt Voltage Gauge Meter Car Boat Truck Auto : Car Electronics I had the exact same one on previously, but the shop I let fix It removed It and didn't reinstall It. So I got another one. Anyway tied It Into the Ignition...

I have been having problems with starting. 1. Battery goes dead when using headlight's (yes the engine Is running, but light's get dim and wont restart when u shut It off, needs jump). 2. Battery goes dead If cranking more than 10 seconds. If I take the spark plug boot off and engage the...

My Weed Eater has a problem with the steering, when I try to turn right when not moving all I get Is clicking but the wheels wont turn until I start moving. Model number 281707 had a 13 HP Tecumseh but shop swapped In a 12 HP B&S Flathead.

I've been having problems with my 12 HP B&S Flat Head 281707 when at full throttle It makes a boom sound like someone Is hitting a bass drum. Sometime It goes boom boom boom I don't know If that's misfiring or what but doesn't sound good does that mean It's running too lean or too rich. It runs...

The furthest I have went was up the street and turned around cause I was low on gas and didn't feel like pushing. But I have seen guys riding there's up to the gas station In the street. If I try to do that I will run out of gas cause I only have a 1.25 gallon tank, and the gas station Is about...

I currently have a 1.25 gallon fuel tank. Would there be a problem If I put a bigger tank on, I heard the tank has to be higher than the carb.

I took my mower deck off In the winter to have a little fun, which didn't go to well cause I slid down my slanted Ice glazed driveway and flew Into a snow bank. :laughing: Anyway when I went to put the deck back on, but when I raise the deck to the highest position 6, the brake/clutch stays In...