Recent content by jbeane

  1. J

    Safety system seems to be working against itself

    Hey guys, Decided to call Dixie Chopper company on Monday and an engineer looked at my schematic and told me how to fix. I appreciate all your help on this and now the rain has stopped plan on applying the information from you and the engineer and hope that resolves the problem. Otherwise I...
  2. J

    Safety system seems to be working against itself

    I will go to the mower and take pictures for you to view. But the battery - wire is very short would not reach the top of the starter for grounding. The red battery + is quite long 18 to 24". Both of these have large circle connectors. The red + wire to supply the system with juice also has a...
  3. J

    Safety system seems to be working against itself

    That leaves me with the black wire from the battery unattached. Where would it go?
  4. J

    Safety system seems to be working against itself

    Thanks, the solenoid has two posts on the bottom. I have the black from the battery and there is a 30A fuse in the taped bundle. The blue wire goes to a push on connect beside the post with the black and red wire. The other post does not have any on it but a very heavy duty uncoated wire leading...
  5. J

    Safety system seems to be working against itself

    Have a good day Rivets, right now you are the only one that has replied so I will wait to hear from you.
  6. J

    Safety system seems to be working against itself

    The wiring harness at the bottom of the starter has a very short red wire that is connected to the same bottom post as the black (-) wire coming from the battery. This harness will only attach at the bottom of the starter because it is zip tied to that location and has very little play. The main...
  7. J

    Safety system seems to be working against itself

    Thanks Rivet, the red from the battery terminates on the left bolt that holds the starter to the engine. At the bottom of the solenoid there is black going back to the battery. There is also a red wire that I suspect feeds the system, the red wire is the only one that might be out of place...
  8. J

    Safety system seems to be working against itself

    Thanks Rivets, the engine is a Kawasaki FX850V 27hp with the original starter being #99996-6121 it is a different number but the same starter. The engine is in a 2015 Silver Eagle 2760 EFI
  9. J

    Safety system seems to be working against itself

    Had to replace the starter on my DC Silver Eagle 27 HP Kawasaki engine and after changing have a weird safety switch issue. Attached the + red cable to the top bolt and the - black wire and another red wire to the bottom of the solenoid and the spade connector to the side of the solenoid. Prior...
Top