Recent content by civic

The issue I see is the key will not go down in the cavity which might make it worse. When I that this thing apart I will check it out.

I went to this link and saw something that was interesting and wonder if anyone here has done this: Wheels getting locked Have you ever looked at the back wheels of your Honda self propelled lawnmower while making a turn? Although we expect the left wheel to rotate while turning right, none of...

I have the same carb and just rebuilt it. I did replace the welch plugs very easy. Look on the internet and find the rebuild procedure. Also use a very thin wire, I used a welders tip cleaning tool to clean out passages. My engine runs better than new now. I also bought a Chinese never worked...

Great find Westman, looks like a better mod. Great find! I was looking today for an oil seal that is 1/2 x 11/16 and found none, however I did find 1/2 x 3/4 at work today but only 1 so far. It fits very tight but I think I can make it work. This is an obsolete part and will be looking to find...

Cleaning, I always use a leaf blower too. I never or very rarely use a hose. I have only cleaned under the deck a few times once just a few months ago when I changed the belt. Not much grass but I do think it improved the mulching. My mower looks well used a few surface rust issues but not...

Thanks for the update. I am still on felt only and holding up. Too frigging hot to mess with it now.

Briantii, you mentioned you used ATF in the trans. when you did this did you replace the o ring seal? I wonder if I open mine up I will need to replace it. This o ring is close to $20 might as well buy a new trans. for $30 more.

It goes on the other side. One facing the deck and the felt sticks to the lip if you bought self adhesive. Cut thin strips.

Westman, did you use felt? If not it is an easy mod w/o disassembling everything.