Recent content by 2 stroke absessed

Thanks for the tips guys.I'll buy in small quantities.If 1 doesn't work,I'll try another.

I'm unsure what 2mm line I've used in the past but currently I'm using 1.6 mm Powerfit brand(premium trimmer line) Made in the U.S.Twist line.Apparently extremely tough and long lasting.

I have a Viking TE700 electric line trimmer.Had it for years.It's been a reliable trimmer with 1 long term issue.The trimming head's bump feed needs to be bumped on the ground a number of times to feed the line out.The longer I am trimming the harder it can get.I tried a few different things to...

I discovered some new problems.One was the fuel bowl float partly filled with fuel.That would create a rich condition.Also the motor wasn't shutting off.This happened once before(engine shut off is not a great design).Both problems fixed and motor is running close to acceptable speed now.Thanks...

Yes bertsmobile 1,we are talking about the same carby.I removed it because the governor doesn't seem to be working.Tall or short grass,the engine doesn't appear to change in revs to counteract the extra load.I have sucked on the governor tube and it's working but as you say intially I found it...

I have a 1996 Victa 2 stroke with the power torque engine and LM carburettor.I disassembled and cleaned the carby 1 day and now can't stop the engine from over revving.I've checked that I reassembled the carby correctly and it is.I packed up the control spring in the carby with a thin shim...