04 Cut the Bottle close to shape needed Preparation and making the piece fit the hole is the key to a successful operation.
07 Apply high heat to SOFTEN the body Heat the tank plastic first because it is bigger. then apply to the patch piece. when they are both feeling
06 Line the patch up so it overlaps as much as possible It is a good idea to make the patch material oversize by about 1/2 inch or so.. It needs to
05 Bottle Shape Comparison and clean tank with the alcohol very well You have to get anything that might get between the plastics out of the way by
04 Cut the Bottle close to shape needed Preparation and making the piece fit the hole is the key to a successful operation.
03 Doner Plastic Bottle Plastic bottles like this for alcohol are the same material and chemical tolerence. A Milk jug will work as well too, but
02 Gas Tank Hole to be Fixed This was my hole to resolve on my John Deere 115.
01 Tools Needed These are the only tools you need to fix your plastic gas tank.. other than the plastic materials to do the job that is..
M

04 Cut the Bottle close to shape needed Preparation and making the piece fit the hole is the key to a successful operation.

There are no comments to display.

Media information

Album
Repair plastic Mower Gas Tank
Added by
mrstan
Date added
View count
517
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Footer Links 1

Top