I have an LT1000 with a Briggs and Stratton 18.5 OHV Intek Engine. The engine blew, so I replaced with a 17.5 OHV Briggs and Stratton. Everything seems to be connected correctly. It starts and runs, but the hydrostatic transmission is not engaging in forward or reverse now. Also, I had taken the brake assembly apart and cannot figure out how to get it back together correctly; I'm not sure if it is related. The brake sits above the disc, and I'm having a hard time finding a picture online to show me how it goes back together. Any help will be greatly appreciated.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
LT1000 Motor swap, hydrostatic does not work
- Thread starter CFE4130
- Start date
-
- Tags
- hydrostatic
More options
Export threadMake sure the push lever on the back of the tractor is positioned correctly.
If it is might try jacking it up with both rear tires elevated start the engine, place in gear and just let it set and run. You are bleeding air.
If it ever starts working you probably need to get ready to replace the Hydro.
A complete model number of the tractor might be helpful. The number from the model and ser tag.
If it is might try jacking it up with both rear tires elevated start the engine, place in gear and just let it set and run. You are bleeding air.
If it ever starts working you probably need to get ready to replace the Hydro.
A complete model number of the tractor might be helpful. The number from the model and ser tag.
Ill try to get the model/serial number later today. Do you meant he parking brake?Make sure the push lever on the back of the tractor is positioned correctly.
If it is might try jacking it up with both rear tires elevated start the engine, place in gear and just let it set and run. You are bleeding air.
If it ever starts working you probably need to get ready to replace the Hydro.
A complete model number of the tractor might be helpful. The number from the model and ser tag.
Why do you think I may need to replace the hydro? It has been running great for years.
Ill try to get the model/serial number later today. Do you meant he parking brake?
Why do you think I may need to replace the hydro? It has been running great for years.
No
Hydro's have a Neutral lever usually on the rear of the machine that allows them to be pushed. If it's set for push it will not drive. If it's not in N work the lever back and forth and try again.
Thanks for clarifying. It is pushed in to drive. Do you have any other ideas?No
Hydro's have a Neutral lever usually on the rear of the machine that allows them to be pushed. If it's set for push it will not drive. If it's not in N work the lever back and forth and try again.