Please help me get this leaf blower started

[Boobala]

Being of limited knowledge of your machine, this may prove helpful, if you have time to watch several.. :thumbsup:

https://www.youtube.com/user/TheRepairSpecialist/videos

 

[ksabin711]

Being of limited knowledge of your machine, this may prove helpful, if you have time to watch several.. :thumbsup:

https://www.youtube.com/user/TheRepairSpecialist/videos

My father was asking if it could be the
Blower ignition module. I have no idea what that is. Now I’m over my head. Thanks Keith

 

[Flintmotorsports]

the engine will not run if the coil is not firing. is your carburetor oem?

 

[ksabin711]

the engine will not run if the coil is not firing. is your carburetor oem?

Yes it is

 

[Flintmotorsports]

Yes it is

so did you revers the fue lines to see if they are on wrong.

 

[ksabin711]

so did you revers the fue lines to see if they are on wrong.

Yes no way lines are wrong. I am trying to include video. I hope it works. Driveway is too dark to see but you can hear what is going on. I have it on choke turn to run.... If I let go of the throttle you will hear it wanted to die. as soon I as I press throttle all the way again he blows leaves. At the end of the video I took my finger off throttle and it just dies. Thanks Keith

didnt work. Can you see it through this link on my facebook?

https://www.facebook.com/TaxOffices.of.KeithSabin/videos/1102137329967217/

 

[Flintmotorsports]

Yes no way lines are wrong. I am trying to include video. I hope it works. Driveway is too dark to see but you can hear what is going on. I have it on choke turn to run.... If I let go of the throttle you will hear it wanted to die. as soon I as I press throttle all the way again he blows leaves. At the end of the video I took my finger off throttle and it just dies. Thanks Keith

didnt work. Can you see it through this link on my facebook?

https://www.facebook.com/TaxOffices.of.KeithSabin/videos/1102137329967217/

was the blower trigger pulled to full?

 

[ksabin711]

was the blower trigger pulled to full?

yes I had it pressed all the way. sometime I would let up a little in the video but you could hear it wanted to stall. Towards the end of the video I had finger press a little on the trigger. But once I let it go it died.

 

[Boudreaux In Eunice La.]

yes I had it pressed all the way. sometime I would let up a little in the video but you could hear it wanted to stall. Towards the end of the video I had finger press a little on the trigger. But once I let it go it died.

Sounds like you need a carb adjustment.........To me ~!~!

 

[Boudreaux In Eunice La.]

See if your carb has this type of adjustment screw or screws....... Not the idle screw though.... The idle screw will be right there where the cable hooks to in most cases....


https://youtu.be/oDkVVL0CJqk