Latest activity

This particular motor is a GX, and still interested to hear if this advice seems right!

I took the carburetor off. I was able to remove the two screws and took the carburetor bowl off.There was a little bit of gunked up gas...

Many may disagree, but do not put anything on battery posts, nothing!

A. I. typed all of that. Do forum guys think it sounds right or needs correction?

Similar thread on another forum https://www.greentractortalk.com/threads/z997-safety-switch-problems.229060/

Clean the battery post and the cable connector to fresh metal. Connect as normal. Then one can dope on grease or dielectric on the...

Did you really type all of this?!

Where the belt rides on the deck pulleys is really important. I have had to modify the pulley height on newer mowers (less than 5 years...

Rotary is a great place to start for aftermarket parts. If you wanna be a dealer, American-made with American steel blades and filters...

Visually yes, bet it looked like a new baby calf. Thermally, no. All it did was mummy wrap the cooling fins killing cooling...

Here's what AI suggests... Of course! A backfire through the carburetor on a Honda GCV160 is a classic and frustrating problem. It's a...

No, certainly clean post and cable clamp then put on nothing. Any substance added to the exterior of the connection will seep and...

Well, there's a reason I said -light- coat

Filter is new, oem.

Does anyone have a good electrical schematic I can get? I have the Owners Manual and an Operators Manual but neither of them have a...