Latest activity

For sure. Check those bearings while you "were" there.

Glad you have it resolved. If there are any signs of smoke, heavy chirping or excess noise shut it down any check the idler and...

Changed the deck belt Saturday and it works as good as new.

Most likely it is the deck belt. As the belt V wears, it gets closer to the outer diameter of the belt so it's deeper in the pulleys...

Does harbor freight make a suitable replacement engine?

When all the vital information is missing, all we have left are little clues to eventually figure out some of the puzzle shown. Maybe we...

Forgot to mention that after rebuilding the carb and still having the issue, I took off the carb and went through it again. Everything...

The carb bowl is built into the bottom of the carb (it's not detachable). To get to the bowl, you have to remove the top half of the...

Those parts were only about $20

Try EBay.

The issue of the correct model number of the mower will come up when parts are needed for repair in the future. Need correct model...

Very frustrating going behind a customer that works on equipment and doesn’t fix it. Then you have to figure out what they have done.

I say hone it very lightly, then re-ring it and run it. Boring to oversize is impractical and very expensive to do in a machine shop...

The hard push by corporate America, the government, and media for battery powered outdoor power equipment and electric vehicles has been...

Sorry a centrifugal clutch was never designed for this application, then engine does not run at high enough RPM quickly like a chainsaw...