Latest activity

I assume you are referring to the key ignition switch? If so, this is accessible for a fairly easy inspection. I will check it out in...

CH22s-66522 on Yazoo with 62" deck. Both fuel pumps I purchased were Briggs and Stratton. Someone just suggested a possible Oil...

What you wrote is a good analysis of the design. My idea was first off you need to be in late fall and the lawn needs to be a very low...

Hi Robert, When it shuts down have you checked for an overheating ignition switch? Is the backside of the switch accessible? What about...

Sounds like someone unfortunately bought a defective store return Honda. My experience is the Honda 160s and 190s are very long lasting...

Jump on facetrash marketplace. Look for Snapper Commercial mowers. Can grab a clean one for around $350 in my area. Your great great...

I will survive, do not worry. A pulley is in progress...I found that the pipe used along chain link fencing is 1-1X8" id, and that was...

Looking where to buy a used 18 hp kohler motor. On my cub cadet snow blower tractor. Preferably in 518 area. Thank you for any help!

Not to mention Honda, I bought one of the last factory repaired recalled HRN 216's from HD and now with 12 hours on it blow's smoke...

I have a Honda HRN216VKAD, with the GCV170 engine bought new in the box from Home Depot on line this year. The engine model is GJAUA...

Unstick the rings. Clean the ring grooves in the piston. CLEAN as in hospital clean. Put it back together. Forget about the hash marks...

yes. pulled engine lots of carbon on top of piston and head cleaned both, found the oil rings were compressed into groove completely...

I removed the fuel line going to the carb and placed it in a container. I then turned the key. The pump was pumping gas thru the line...

I was hoping rivets can design this

So the new fuel pumps are not working? Guessing these are OEM Kohler parts?