Latest activity

Rig up an aux fuel tank that is HIGHER than the carb. Just to confirm lack of fuel is the issue. Mow with it a while. Many a time fuel...

From a reputable mower/tractor/small equipment dealer.

Where did you get these from? Scamazon or Fleabay? OEM parts????

And will this work I have no idea someone can go build a prototype and let me know. Jim

I was hoping rivets can design this

Or the other idea I had was to keep your existing blades on the machine and then you have this two-piece fan blade system that mounts to...

Goter done......starter 84010941 with flywheel cup 593960 fixed it. Thanks again to all that pitched in to help, bartles

Tons more is not better? But it's the American way.. way over the top! Happy mowing and be safe!

If a little is good, then more is better. It's the American way. Applies to many things, like sealant, grease, oil level, premixing oil...

I told you what I use. It is non hardening. As in EASY to remove NEXT TIME. Saves the next guy from cussing his brains out. Totally...

The cable with the spiral conduit is replaced by loosening/removing the clamp to get the cable out the other plain cable that...

So I wish someone would invent something like fan blades for a mower deck so it would be a typical mower deck blade but as you go out...

I will have to see if it has an "oil pressure switch"? The shutdown takes about 3 seconds...a single or duel very quick shudder then...

Boy what ever happen to using a backbone razor blade first and then a final clean up some 2" Medium grit Scotch Brite Discs on a die...

Use a heat gun to soften up the RTV. Use a drill with a wire brush to remove the RTV.