Latest activity

Appears it should be a 7/16-20 tapped 1 inch deep

Thank you, that is the ticket. I had to get a tap and once I was able to clean it out, should work just fine. Michael

Refused to buy a repro ignition switch. Dealers inventory had no branding or packaging to indicate it is any better than after market...

Thank you, that is the ticket. I had to get a tap and once I was able to clean it out, should work just fine. Michael

https://www.partstree.com/models/386777-0111-e1-briggs-stratton-vertical-engine/?msockid=2107a1b59eda606333edb7d59fb561ff

absolutely a spring startup prerequisite, get those mouse nests out of there before you blow a head gasket

How about cleaning some cooling fins every year? I've heard that is a must "to do" thing on ALL mowers.

Is the engine past it's 3 year warranty?

I'm all eyes. Please elaborate. 🍿🍿

Appears it should be a 7/16-20 tapped 1 inch deep

B&S vanguard 23hp 386777-0111-e1 05113011.

Solenoid shift starter should keep the Bendix up; unless, the battery voltage is dropping below 9.5v. If the applied voltage is dropping...

If that is the case then the OP has a problem as I haven't seen a double stack pulley that is 1-1/8 ID. And I just had a problem with CC...

I like it when a DIY type uses clear bathtub silicone and then wonders why it still leaks. LOL

What do I lubricate &/or look at to repair? Thanks!