Latest activity

The 3 fuel lines should be connected as follows: The (clear) main fuel line with the filter (filter inside the fuel tank) goes to the...

How about cleaning some cooling fins every year? I've heard that is a must "to do" thing on ALL mowers.

Don't know how many valve covers I've tried to remove. Globs of RTV all over the engine. End up bending and replacing the valve cover...

I agree with slomo, At the very most I will only use ultra gray very thinly on a good gasket to reseal a valve cover, but not just...

Yes sir. Head and block. All around the engine. Videos below.

I always check the oil before every mow. OK I will smell the oil for gas. come to think about it the oil doe's appear to be a tad...

good video you know my cable has been real constrictive the closer to choke I move it. actuely it's never been smooth. this for over 12...

I always check the oil before every mow. OK I will smell the oil for gas. come to think about it the oil doe's appear to be a tad...

I've had my Z445 for eleven years now.

Emissions vacuum line that connects to the rollover valve on top of the fuel tank. If you don't have those items then ignore the barb.

I've refurbed about 10 of these and they come in with mostly bad decks which is a by product of customers ignoring the clippings on the...

This is shaping up to be a used engine refit with a larger crank diameter.

It looks a lot like a tank ventilation problem, try opening the cap slightly to see if that changes anything. I've had the same problem...

Follow the hydro bypass rod back to the hydro transaxle and look at it and push/pull it back and forth and see if it has full travel...