Latest activity

It looks a lot like a tank ventilation problem, try opening the cap slightly to see if that changes anything. I've had the same problem...

Pull the top engine cover off. Use your eyes to make sure the carb linkage is working properly. About 3/4 down on the throttle, should...

Pull the upper cover and air cleaner off/ out of the way then operate the throttle to verify the choke is working freely and releasing...

Think about this one a bit. Pull the oil dip stick out. Use that thing on the front of your face. Still need help? :geek: Sorry...

A throttle cable adjustment or new throttle cable might do the trick. The throttle plate should close all the way on full choke.

air filter clean?

most likely you have a fuel or carburation problem. Check the oil too to be sure it isn't filled with gasoline that has been leaking...

Youtube is free.

I hate it when someone hijacks a thread...Start a new thread if you have a problem as it is easier to get answers as this thread is 3...

Please think, of the next guy, that has to remove that cover. Use the OEM paper/rubber gasket if at all possible. Or a sealant that...

That’s not the full model number. I also see you’ve posted three threads about the same issue, that’s a NO NO. If your model number is...

I’m assuming you are referring to the drive pulley. We are going to need the model and serial numbers, normally located under the seat...

Check valve lash per your engine manual.

Were all the valves closed when you did the leak down? All must be closed (TDC). Continual smoking is piston rings/bore slash sealing.