Latest activity

TRUE ! Almost all surging problems are cause by the pilot jet. Depending on the size of the engine, you may or may NOT be able to...

Spark plug gets gas fouled every cold start Intek 12.5HP I mow twice a month. When I go to crank her up, I press the throttle all the...

Chris there's a single idler pulley you need to check the next time you're under there. It's the tension pulley for your hydro drive...

Not a Yamaha, but I had to replace the 27hp Kohler Courage in my old 2011 ZT60 a few years ago. It was wore out and only running on one...

thx for the reply, i've refurbed and sold about 35+ riding mowers but am mostly focusing on Zero turns, especially the Cub Cadets, Toro...

I've learned this over many years of bearings being installed by people assuming everything was properly packed with grease. When I was...

you can buy/install a deck washing kit (adapter) on any deck to clean the underside. Just buy from Amazon, drill a hole, snap on the...

I peened mine like I saw on you tube. After two mows, I checked on it again and it started comming out so I ended up just getting a new...

Any MTD 50" zero turn deck will swap over. I have one from a White zero turn under one of my RZT50 mowers now. Red/maroon deck and a...

Instead of focusing on quality a durability that has kept them alive and well all these years, many are leaning towards "options and...

Who calibrated your digital unit? 🤔

Lubing the bolt will cause u to overtorque them.

Chinese castings.....

Don't know that this will help you but many Honda walk behind mowers have the same problem if they have a blade clutch on them. With the...

Image 6678 says Nope. The only way to save that would be clean it up, oxy/acetylene metal spray process to build it up and turn it in a...