Latest activity

It all depends the journal condition after the Muriatic Acid bath. And have everyone forget about installing sleeve bearings? Yes it...

So the latest is it runs so erratically as soon as you start the engine it seems like after ruling out the flywheel key it has to be a...

General rule of thumb is the patch plate needs to be 4 times as long as the frame rail is wide ( tall if you like ) Remember the frame...

Is that your "problem" ? It's not a problem.

Well..."water". Let's look for root cause. 1. Mower stored indoors? 2. Fuel cans stored indoors? 3. Same Fuel cans? 4. Fuel obtained...

Champion plugs are the standard answer when they have no clue. 🤔

Bad Gas is the standard when they have no clue . .Put Champion plugs in it .

Bull****.

Look ethanol fuel use is Okay. I been using it for a very long in all my equipment. Because these engines runs off the idle ports when...

awesome!

Had a similar situation. Per advice on a different site more than 5 years ago, i put red thread locker on the exposed valve guide...

Got a Dixie Chopper LT2500-50D Silver Eagle 50" built circa 2006 in 2007 and have been abusing it since. Cutting 3.75 acres of grass and...

Bad gas is usually from them leaving fuel in them while on the sale line. Fuel left sitting degrades especially with heat and sudden...

take it to them. They cannot diagnosis it over the phone. If you mess with it, they can say you screwed it up. Could be a small spec of...

Yes, you’re correct. Murray 5/25 is 5 hp with 25" blade. I try to figure out some specific model number for this, to ensure the right...