Latest activity

Everything has to be connected, and the voltage regulator body properly grounded. Measure output to the battery at the battery, not at...

I checked the engine number HP rating, and it is around 30HP @ 3600 RPM. Maybe a pull start is not realistic on this big of a motor...

it will start when cold most of the time .. but sometimes when warm or hot it is very hard to start any help would be welcomed...

it will start when cold most of the time but when warmed up it sometimes is very hard to restart has a Kohler kt-715 on it any ideas...

Now, figure out WHY it happened. You are not done yet.

Old post but..... Yes gentle circles or X patterns. Let the paper do all the work. Do not push with any force on the head or block...

don't hold the outside edges when you mill it, and make sure the piece of glass is thick enough to remain flat. I use an old piece of...

Dewalt PW with a honda engine. Starts 1st pull but just sputters and will until I shut it off. New carb, changed gas, new plug. thanks...

put a magic marker all over the mating surface and lay it on a thick piece of glass with like 2000 grit on it. Wiggle it a little and...

Dude ghosted us.

Did you get this fixed?

Amen to that. Works every time.

Post a video on youtube and link it here. We need to hear it.

Thanks - I plan to remove the fuel tank and clean it out!

Thanks - I plan to remove the fuel tank and clean it out!