Latest activity

It seems to be something internal to the throttle lever assembly. I can disconnect the carburetor end of the sheath and wire and remove...

JD called today, said mower was ready, water in the fuel pickup. It runs perfect so far. When surging first started last week, I took...

Coolant probably never changed. Turns acidic over time. Seals start leaking and parts break.

So not much time to burn off any condensation really in frigid temps?? Could be a head gasket or lack of running it till it gets hot...

Emissions vacuum line that connects to the rollover valve on top of the fuel tank. If you don't have those items then ignore the barb.

If the cable is good then the adjustment for the throttle slash choke is off. Download the engine manual for that mower. Read about...

This thread should be deleted. Hopeless case.

Put all the stock parts back on. Keep the credit card in your wallet. Fix what you have. OEM parts are better than anything off Scamazon...

This thread should be deleted. Hopeless case.

An oily or lubed bolt requires less final torque than a dry bolt. That being said, that Briggs step #1 ILENGINE posted is news to me...

Many members way more knowledgeable than me have begged, cajoled and scolded to get the simple ID of the mower/engine to give the most...

Sounds like water in the gas to me. Pull the hose AT the carb inlet. Drain into a glass jar. Look for water in the bottom. Use E-0 gas...

The cable wire moves freely within its outer sheath. And the throttle lever hits something solid within its enclosure. It feels like...

As high as that port is, must be a vent. The replacement carb pic shows a welch block off plug I think.

Carful the brand and formula used here. Some contain vinegar which as we know is an acid. Will corrode things in short order. Read the...