Latest activity

No talk about the cooling fins. All hey let's hammer down the valve guide. What about what caused this to happen in the first place?

manual say replace head if it overheats and damages guides. Ne factory kit per head is $200 - $220. What is your time worth? Or lets say...

I have never pulled a head for ANY reason that wasn't in need of a serious lapping job.

example of warped head

Totally agree. Why, because that Band-Aid repair will not last. People have $1400.00 cell phones and skimp out on mower repairs...

I recently replaced the carb, oil, oil filter, air filter, and spark plug on my LT1000. It is misfiring and then stalls out. Anyone...

An oily or lubed bolt requires less final torque than a dry bolt. That being said, that Briggs step #1 ILENGINE posted is news to me...

Lube the cable or replace it.

Yes you can always go heavier gauge. Mowers tend to be made on the very edge of acceptable wiring to make them function when new, but...

Thanks for your help Scot. I will wait for your response.

Thanks for your help Scot. I will wait for your response.

Thank you for that information. I understand that in position 4 (from the highest setting), the deck will not raise any further. I...

It happens straight, but is worse when turning. Both factory and Gator blades did this new (and sharpened), so it isn't from blade...

Grandpa died and left a Billy Goat FM3300 with a blown 13hp Intek pullstart. I scrounged up a 24 horse Briggs (serial no. 49M777 0120...

I have checked everything you mentioned and all seems fine but when I placed the pins in the lowest hole, the deck lift handle went to...