Latest activity

The governor has only one job and that is to "govern" (control) the top running speed (RPM) of the engine, that is it, end of story...

Hi all, I have been considering a robot mower for my garden - with an area under trees i was at the kingsbridge show today , and they...

Honda cranks are cheap compared to Briggs or Kohler but it looks like they are trying to catch up. A few years ago they were about...

True, but it would sure make it easier to help them if they would write in a semi-readable format.

This is a lawnmower forum, not English 101. Many people have terrible writing skills, and they always will.

i get an old plastic drink glass,9subway0,cit a section out of 1 side big enough to get fingers in. loosen filter,slide this up against...

The mower will normally do that when turning. You didn't say if when turning or otherwise. But one factor will greatly influence that...

I've a machine with a similar set up: No way to drain without getting oil on the frame. Solution: Dollar store has 16" x 24" x 2" deep...

Take the filter off cold engine. When you warm it up all you do is fill the filter with oil. “Anti drainback valves” leak everything...

did anyone look at the Amazon link I posted? These things are incredible.

Unless the blades are gear drive or clocked with a timing belt the blades will not stay clocked and will collide

This had the old cup style that gets ruined when you take it off. I don't think this rod has a drilled end and I will have to take it...

The US "education" cabal is a near total failure. It's terminally infested with anti-Americans.

Did you balance the blades ? Blades are not balanced in production. In my 10 years of commercial mowing, I only have about one out of...

The mower will normally do that when turning. You didn't say if when turning or otherwise. But one factor will greatly influence that...