Latest activity

Think that may be the case here. Springs push down same amount on both exhaust and intake. Valve lash was VERY loose so I may have...

Got it, thanks.

D110 not getting gas on startup. Runs fine once started. Fuel pump works, carb not getting gas to cylinder. Can start by manually...

Treat the fuel with sea foam. Take the fuel filter loose and drain the fuel out of it fill it with sea foam. Start and run see if that...

Cardboard is what I use then it is re-cycled for some of the kindling in the wood stove .

Working in a trade school I had access to many different types of materials. Metal formed very easily, but the environment of a shop...

Hmmmmm, well imagine that . . . . . Cons & Common Complaints Cut Quality: Some reviews indicate that the mower may leave "stragglers"...

Some just don't get it that there is only a 1/16 overlap if 72" true cutting width which means the OP has to have prefect blades. Either...

With the engine warm, drain as much oil as possible. Use and aluminium pie plate to form a trough beneath the Filter.

Are you able to correctly adjust valves? I ask because you asked what is spec on valves for this engine. It is simply a matter of...

From your description, it needs the valves adjusted so the compression release will work. If it still fights the compression after...

All correct. Keep the engine at roughly 3600rpm at ALL times. This is for MAX engine cooling and lubrication. For the deck it cuts and...

With the engine warm, drain as much oil as possible. Use and aluminium pie plate to form a trough beneath the Filter.

D110 not getting gas on startup. Runs fine once started. Fuel pump works, carb not getting gas to cylinder. Can start by manually...