Latest activity

You have an odd one when it comes to riders. Remove the top engine cover and disconnect the single wire coming from the harness, that...

Possibly the pull start engage levers are not fully releasing or there is debris under the fan shroud. If it were serious the engine...

If it had wheels, they would have been mounted on front backets on each side. All I find online is they have a free floating deck.

I think one went here

I see a hole on one side where the grass comes out when cutting i dont see one on the left side. This is a older 2014 it has no wheels...

Of course all mowers have issues over time especially if abused. But the Scags that I worked on have been fairly robust. As have been...

Hello woodstover, Sorry, the gear cannot be flipped. If you replace it place a mark with paint or nail polish on it to make sure of the...

I've always assumed Scag mowers were top of the line - one of the best that you could buy. While chewing the fat with a friend, I...

Hello Kenneth2, I suspect valve adjustment was way overdue. That happens a lot. Also, a possible overheat would stick a valve and...

The OP said it is an Intek not a Vanguard engine so that is the wrong service manual. It would be Briggs 273521 manual. That engine...

Good policy. I used a 10 ft pull type Bush Hog 3126 for 26 years, behind a 90hp Kubota M9000, maintaining about 12 acres of grass...

One thing is for sure, foam filled tires ride very hard, and all that extra shock is transferred into the implement pins. Calcium mix...

Read next post I was editing the manual number when startech replied. Service manual for that engine is Briggs 273521. (around $30) Well...

Only mow when grass is Tinder Dry. After changing the oil, I remove my Deck in the Fall and turn it upside down on a gravel area and...

Hope it is ok to ask question on snowblower. Engine is a Briggs 21m307-01307-0135-f1. Would not start and had no compression...