Latest activity

Not avilable? see last post. A serch of the net yeilds many sources.Though I thick they are expensive in the 5-6 dollar range.

You're obviously very popular for those of us who need the repair manual. My RM300e is having the same problem, and I'm really...

There is no holes in the brush plate

can you use strips of thin cardboard or plastic cut from something to help hold them back? Do the brush holders have small holes in...

Sounds like one of the valve guides are backing out of the head or valve seat is loose. Do compression test, should have 120psi or better.

I've seen the procedure on You Tube. Give it a search.

Red goes back to fuse and on to battery for charging as well as safety switches. This wire does have a diode as shown above in diagram...

If you see one on another carb and want to try to put it on your carb soften it in hot water to remove and then re-install without...

Just one question Have you checked the voltage at the S terminal when starting? If so Please report back. Thank You.

Actually the shorter thread spark plugs that are depicted in that picture might be for for a machine I purchased that has a twin...

Thanks so much for the detailed answer and the I think you said a 12yc that comes to mind but whatever you said that is the one that I...

The next possibility is debris floating around in the fuel tank and blocking the fuel pickup tube. That or the fuel shutoff solenoid on...

None of the problems mentioned above by Gord Baker or bentrim apply to this case. Testing showed that there was nothing wrong with the...

As BGS states, if this is a Briggs engine, coming to the engine connector are two charging wires (may be in smaller connector). One...

I had this happen on a 15 year old 1500z. I have a newer Ferris, my wife uses this older one. I got on it one day and felt a lot of...