Latest activity

Something is goofy. The parts diagram shows a 3 way valve but the service manual shows a 2 way valve with the on-off lable for the...

Good morning. The spindle would rattle, be loose. I could feel the roughness in the deck lift pedal. After disassembling, the bearing...

At first I tried to disable the solenoid by removing the rubber tip from the plunger and unplugging the electrical connector to the...

After soaking the carburetor parts overnight in carburetor cleaner, making the gaskets myself from an old gasket material I found, the...

Give us the model number and serial number of the mower. You may have a faulty valve or the wrong valve installed from the factory. It's...

Simple fixes will shut a lot of people down because they don’t even try for a variety of reasons. Some of these reasons include: lack...

First thing I would do is clean carburetor, run and test under load. That doesn’t do it, check/adjust valves.

The tank crossover valve is either on the left position, for the left tank, or on the right position, for the right tank. There is no...

I think the crossover line going from tank to tank has a shutoff valve made into the line.

Front wheel drive mowers are probably the worst mowers for steep inclines. Not much you can do to solve this issue.

Was just thinking about you this week Star Tech. If a person has skills, knowledge, experience, and a positive attitude, it really makes...

I don’t even know of a machinist in our area that will grind valves. When you factor in your time back and forth, and paying labor cost...

These are mower engines not the space shuttle. Lapping seals valves to valve seats. Pretty important in the combustion process.

Carb needs a thorough cleaning or a little more technical explanation. A carb has two fuel circuits. The idle circuit and the high...

Okay I understand and thank you! Aluminum tends to corrode in the only storage available for it. I'll check it and complete a thorough...