Latest activity

I made a forum post explaining all that. This is only my HELLO post.

what makes you think the spindles are bad? Noise? Rough running? Belt jumping off?

They do what they say they'll do and ask for 3 references , Go see those references in person .

Is there any measures to prevent pushing the remaining seals out .

Usually, you don't pull a mower backwards too often, so the total extra effort for the whole cutting job is minimal. One time I found a...

Thanks, Auto Doc's. I'll chase fuel delivery.

I removed that wire completely from the harness and if I need lights I can wire them directly to were they need to be out all the mess...

Hmmm, Ever thought about downloading the schematic? I could post it but I won't. And that dang black lead from the stator is the AC...

loose black wire completely removed from that harness now only connected the stator back to the chassis wire harness. but still nothing...

OK; so now we know that the starter will turn the motor. The Next test is for the solenoid. Take a 12 volt source (wire), leaving the...

the web page says they come with a 3 year warranty. Use it is what I would do.

Yes, new Spartan keypad consoles come with a 3 year warranty. I have seen several over the years that either new a new keypad console or...

60 PSI is good for and engine with a cam compression relief built in. This favors a lack of fuel supply from the tank.

11A-A22J766 mower. Engine is a Chinese Honda clone 140cc. I cleaned carb w/ USC = no joy. New carb installed = no joy. Valve lash good...

I don't know but mine was given 5 yrs ago.Sat for 2 yrs before me.thoro carb clean,oil change every I guess 1.5 mos,oil...