Latest activity

Glad you got it figured out. This is example of just because they claim it fits does not mean that it works correctly. This could...

Comparing the original carb idle jet i.d. (.060) and the replacement carb (.025) I've confirmed what several of you have posted. I did...

407777 0188 B1 On a service call, started out, this thing ran like crap. Lot's of back firing through the exhaust. After about 10...

correct blades and positioned correctly

Can’t find 2007 Regent starter replacement

these tests you are saying have been completed. the solenoid from the 2nd post did not turn the start failed connection. I have the new...

You have a short on this circuit. Find out why and where on said circuit. Wires rubbing, mice chewing....... Call JD and ask for a...

I have a John Deere Z345r zero turn mower that blows the PTO fuse every time I start the mower, without actually engaging the PTO. I...

At the rear of the mower there is (or should be) a piece of metal hanging down (called the safety shield) that spans from one rear wheel...

My 18 HP vanguard has a vibration when I go higher than idle. It is not in the mower deck. The hydraulic oil is fine. I think I will...

I have a Gravely Pro-Turn 160, Kawasaki FX730V. Today while my son was mowing, it just started stopping on him. It will crank right back...

Belt number should be Ariens 21547188 V-Belt. Your belt may not have the same angle, which is riding to low in the pulleys.. Also...

Belt number should be Ariens 21547188 V-Belt. Your belt may not have the same angle, which is riding to low in the pulleys.. Also...

OK; so now we know that the starter will turn the motor. The Next test is for the solenoid. Take that 12 volt source from the previous...