Latest activity

So your carb has the jet adjust on the front of the carb? If so that screw is for slow idle smooth engine idle adjust. I've seen some...

Bearing would be 16 on the left hand side from behind the mower

I've got a 9360600 Series Ariens Riding Mower with a 42" Deck. The belt is supposedly 954-04060 which is a 1/2" x 95.5" belt. If I put...

You might consider the whole carburetor because it comes with the gaskets.

I've shimmed a lot of old truck starters in my career, but never for a mower starter. Glad you found a solution. It might be a good...

This site does not have your engine, but the gaskets and carb are the same. Carb part number is 60730 and I think the two gaskets you...

That’s super! Thanks for the info exactly what I needed Here is pic of my reburb HR 215 HRM. My son found it in his work junk area...

Is it part #12 in this diagram? Hard to tell with your pictures/

One can use a cereal box to do just that. Also hit it with some Permatex High Tack gasket sealant. Works like a charm.

Also had starter issues. Also need to check the engine mounting bolts for tightness. Be sure to pull engine shroud and check top bolt...

Most of those tow behind style aerators don't work. As in if you have hard pan clay soil, you have to get the moisture content perfect...

OK; so now we know that the starter will turn the motor. The Next test is for the solenoid. Take that 12 volt source from the previous...

Loved your “story”. Be well! Cheers

Hello 2muchgrass2mow, Common sense only exists among people who are too poor to be stupid. I was raised to give my best effort...

Are the chew marks caused by the failed bearing, or you trying to get it apart? Answer: Me, Tried to see if the spline was screwed on...